The electrochemical machining process involves electrical and chemical processes while
removing materials from the workpiece. Electrochemical machining (ECM) lacks accurate …

Macro electromechanical milling has recently attracted increasing attention because
numerous large thin-walled structures composed of difficult-to-cut materials are employed in …

In this study, we enhanced the adhesion of graphene nanosheets to achieve homogeneous
dispersion, consequently improving the electrical and thermal conductivity, coefficient of …

In this research, trials were performed to improve the mechanical properties of pure
aluminum, maintain its lightweight, and enhance the distribution of graphene with high …

The material removal rate (MRR) in the internal cylindrical plunge electrochemical grinding
(ICPECG) is hard to assess because it involves two feed motions: workpiece circumferential …

In this research, a new nano-open porous copper without using a pore-forming agent was
innovated. Five copper samples which are pure copper, Cu/2.5% Al2O3, Cu/2.5 (Al2O3 …

In this study, the nano-aluminum powder was reinforced with a hybrid of copper and
graphene nanoplatelets (GNPs). The ratios of GNPs were 0 wt%, 0.4 wt%, 0.6 wt%, 1.2 wt …

Aiming at the difficulties in setting process parameters and the low accuracy of process
performance prediction in electrical discharge machining (EDM) hole machining of alumina …

Electroless deposition, followed by the powder metallurgy method, has been used to
manufacture Cu-10WC/GNs nanocomposite with graphene content of 0, 0.25, 0.5, 0.75, and …

When electric discharge machining (EDM) is used to process Al2O3-TiC ceramics, it is
difficult to obtain an optimal production efficiency and tool wear rate. As the target demand of …