Inconel 718, a nickel, chrome and iron alloy, has special advantages, such as high-
temperature strength, thermal resistance and corrosion resistance, which facilitate wide …

High strain rate can be produced in many manufacturing processes, such as ultra-high-
speed machining and ultra-precision machining. This paper reviews the high strain rate …

In this study, the effects of cutting edge geometry, workpiece hardness, feed rate and cutting
speed on surface roughness and resultant forces in the finish hard turning of AISI H13 steel …

Hard turning is a turning operation performed on high strength alloy steels (45< HRC< 65) in
order to reach surface roughness close to those obtained in grinding (Ra∼ 0.1 μm) …

This paper gives a brief overview of HSC technology and presents current progress in high
performance machining of cast iron and alloy steels used in die and mold manufacturing …

The formation of saw-tooth chips is one of the primary characteristics in the machining of
hardened steels with geometrically defined cutting tools. Catastrophic failure within the …

Surface integrity is the key for process selection of hard turning or grinding in industry. This
study identifies the fundamental differences in the integrity of hard turned and ground …

An easy-to-produce sawtooth chip is the main feature of the high-speed milling process for
hardened steel. This chip may lead to a high-frequency periodic fluctuation of the cutting …

The formation of saw-tooth chip is one of the primary characteristics in high-speed cutting
and in the machining of difficult-to-cut materials, such as titanium and its alloys, hardened …

We have investigated the cutting forces, the tool wear and the surface finish obtained in high
speed diamond turning and milling of OFHC copper, brass CuZn39Pb3, aluminum AlMg5 …