A review of growth mechanism, structure and crystallinity of anodized TiO2 nanotubes
D Regonini, CR Bowen, A Jaroenworaluck… - Materials Science and …, 2013 - Elsevier
This paper reviews the state of the art of anodized titanium dioxide nanotubes (TiO 2 NTs),
with an emphasis on the growth mechanism leading to their formation and the effect of heat …
with an emphasis on the growth mechanism leading to their formation and the effect of heat …
A historical, statistical and electrochemical approach on the effect of microstructure in the anodizing of Al alloys: a review
JVS Araujo, M Milagre, I Costa - Critical Reviews in Solid State and …, 2024 - Taylor & Francis
Anodizing is a well-documented surface treatment that is inserted in a complex protection
system against corrosion applied to Al alloys. In the scientific literature, there are many …
system against corrosion applied to Al alloys. In the scientific literature, there are many …
A flow model of porous anodic film growth on aluminium
SJ Garcia-Vergara, P Skeldon, GE Thompson… - Electrochimica …, 2006 - Elsevier
The development of pores in a classical porous anodic film formed on aluminium in
phosphoric acid solution is investigated. The study employs a tungsten tracer layer that is …
phosphoric acid solution is investigated. The study employs a tungsten tracer layer that is …
Self-Ordered Anodic Aluminum Oxide Formed by H2SO4 Hard Anodization
K Schwirn, W Lee, R Hillebrand, M Steinhart… - ACS …, 2008 - ACS Publications
The self-ordering of nanoporous anodic aluminum oxide (AAO) in the course of the hard
anodization (HA) of aluminum in sulfuric acid (H2SO4) solutions at anodization voltages …
anodization (HA) of aluminum in sulfuric acid (H2SO4) solutions at anodization voltages …
Effect of chloride ions on the sparking voltage of working electrolytes and its restraint method
Y Zhang, P Li, S Wang, J Zhang, L Liu… - The Journal of …, 2023 - ACS Publications
As we all know, chloride ions (Cl–) are major impurities that significantly influence the
lifetime and degradation of the dielectric properties of working electrolytes in aluminum …
lifetime and degradation of the dielectric properties of working electrolytes in aluminum …
Strategies for the replacement of chromic acid anodising for the structural bonding of aluminium alloys
GW Critchlow, KA Yendall, D Bahrani, A Quinn… - International Journal of …, 2006 - Elsevier
The 40/50V Bengough–Stuart chromic acid anodise process is widely used in demanding
applications as a prebond treatment. This process has a number of disadvantages and its …
applications as a prebond treatment. This process has a number of disadvantages and its …
Anodic growth of titanium oxide: electrochemical behaviour and morphological evolution
The mechanism of growth of anodic titanium oxide in sulphuric acid has been investigated
by potentiostatic and potentiodynamic anodizing, electrochemical impedance spectroscopy …
by potentiostatic and potentiodynamic anodizing, electrochemical impedance spectroscopy …
FESEM and EIS study of sealed AA2024 T3 anodized in sulfuric acid electrolytes: Influence of tartaric acid
G Boisier, N Pébère, C Druez, M Villatte… - Journal of the …, 2008 - iopscience.iop.org
The present study investigates the effect of tartaric acid on anodic film morphology and on
corrosion resistance of hydrothermally sealed anodized AA2024. Anodizing treatment was …
corrosion resistance of hydrothermally sealed anodized AA2024. Anodizing treatment was …
Cyclic oxidation processes during anodizing of Al–Cu alloys
L Iglesias-Rubianes, SJ Garcia-Vergara, P Skeldon… - Electrochimica …, 2007 - Elsevier
The influence of copper on the morphologies of porous anodic alumina has been
investigated under current and voltage control using a sputtering-deposited Al–2.7 at.% Cu …
investigated under current and voltage control using a sputtering-deposited Al–2.7 at.% Cu …
The bonding strength and corrosion resistance of aluminum alloy by anodizing treatment in a phosphoric acid modified boric acid/sulfuric acid bath
J Zhang, X Zhao, Y Zuo, J Xiong - Surface and Coatings Technology, 2008 - Elsevier
The process of phosphoric/boric/sulfuric acids anodizing was studied as a new pre-
treatment for adhesive bonding of aluminum alloys. The microstructure and topography of …
treatment for adhesive bonding of aluminum alloys. The microstructure and topography of …