Additive manufacturing: innovations, advances, and applications
TS Srivatsan, TS Sudarshan - 2015 - books.google.com
This book presents an overview of recent and emerging additive manufacturing (AM)
techniques and their applications. It explains several of the processes developed using …
techniques and their applications. It explains several of the processes developed using …
Effects of ultrasonic vibration on the iron-containing intermetallic compounds of high silicon aluminum alloy with 2% Fe
G Zhong, S Wu, H Jiang, P An - Journal of alloys and compounds, 2010 - Elsevier
The effects of ultrasonic vibration (USV), the combined effects of USV and the addition of Mn
on the morphology of iron-containing intermetallic compounds of Al–20Si–2.0 Fe–2.0 Cu …
on the morphology of iron-containing intermetallic compounds of Al–20Si–2.0 Fe–2.0 Cu …
Friction and wear properties of Al-20Si-5Fe-2Ni-Graphite solid-lubricating composite at elevated temperatures
H Tan, S Wang, Y Yu, J Cheng, S Zhu, Z Qiao… - Tribology …, 2018 - Elsevier
Tribological behavior of the Al-20Si-5Fe-2Ni alloy and its composite containing 30 wt%
copper-coated graphite were investigated at 25–500° C. The result indicated that the …
copper-coated graphite were investigated at 25–500° C. The result indicated that the …
Effect of rapid solidification on the microstructure and mechanical properties of hot-pressed Al–20Si–5Fe alloys
The aim of this work is to study the effect of cooling rate and subsequent hot consolidation
on the microstructural features and mechanical strength of Al–20Si–5Fe–2X (X= Cu, Ni and …
on the microstructural features and mechanical strength of Al–20Si–5Fe–2X (X= Cu, Ni and …
Nanocrystalline eutectic Al–Si alloy produced by cryomilling
J Milligan, R Vintila, M Brochu - Materials Science and Engineering: A, 2009 - Elsevier
A nanocrystalline Al–Si eutectic alloy was produced by mechanical attrition under cryogenic
conditions. The resulting alloy was characterized using X-ray diffraction, scanning and …
conditions. The resulting alloy was characterized using X-ray diffraction, scanning and …
Structural investigations of mechanical properties of Al based rapidly solidified alloys
E Karaköse, M Keskin - Materials & Design, 2011 - Elsevier
In this study, Al based Al–3wt.% Fe, Al–3wt.% Cu and Al–3wt.% Ni alloys were prepared by
conventional casting. They were further processed using the melt-spinning technique and …
conventional casting. They were further processed using the melt-spinning technique and …
Structure and mechanical properties of Al-Cu-Fe-X alloys with excellent thermal stability
A Školáková, P Novák, L Mejzlíková, F Průša, P Salvetr… - Materials, 2017 - mdpi.com
In this work, the structure and mechanical properties of innovative Al-Cu-Fe based alloys
were studied. We focused on preparation and characterization of rapidly solidified and hot …
were studied. We focused on preparation and characterization of rapidly solidified and hot …
[HTML][HTML] Deformation behavior of Al–Si alloy based nanocomposites reinforced with carbon nanotubes
HJ Choi, JH Shin, BH Min, DH Bae - Composites Part A: Applied Science …, 2010 - Elsevier
Nanocrystalline Al–Si alloy-based composites containing carbon nanotubes (CNTs) were
produced by hot rolling ball-milled powders. During the milling process, the grain size was …
produced by hot rolling ball-milled powders. During the milling process, the grain size was …
Effect of Cr and Mn on the microstructure of spray-formed Al–25Si–5Fe–3Cu alloy
Y Cai, R Liang, L Hou, J Zhang - Materials Science and Engineering: A, 2011 - Elsevier
The hypereutectic Al–Si–Fe alloys with different Mn and Cr addition were synthesized by
spray forming technique, and the microstructural evolutions induced by Mn and Cr have …
spray forming technique, and the microstructural evolutions induced by Mn and Cr have …
Two quite different primary Mn-rich phases in Al-Si-Cu-Mn heat-resistant alloy and its effect to mechanical properties
G Li, H Liao, A Xu - Materials Science and Engineering: A, 2018 - Elsevier
Two quite different primary Mn-rich phases were observed by optical microscope and
scanning electron microscope in the surface and central parts of Al-12 wt% Si-4 wt% Cu-2 …
scanning electron microscope in the surface and central parts of Al-12 wt% Si-4 wt% Cu-2 …