Early stages of high-temperature oxidation and hot corrosion of Ni-based single-crystal
superalloy were studied at 900° C by introducing sulfate coating. Detailed elemental and …

The high-temperature corrosion characteristics of Inconel 625 and NiCrMoAl cladding layers
were investigated in molten NaCl-KCl and NaCl-KCl-K 2 SO 4. In NaCl-KCl, the corrosion …

Hot corrosions of laser-cladded inconel 625 in molten salt of Na 2 SO 4-MgSO 4 mixture
have been studied at 900° C to address its anticorrosion behaviors. Elemental and …

The effect of Zr partially replacing Pt on the hot corrosion resistance of β-(Ni, Pt) Al coating at
900℃ has been studied due to the high cost of Pt. The Zr replacing Pt coatings with …

Abstract Ti-48Al-10Cr (at.%) intermetallic alloy was produced by electric current assisted
sintering (ECAS) technique. The oxidation and hot corrosion behaviors of intermetallic alloys …

The effects of chromium and silicon modification on the microstructure and hot corrosion
resistance of slurry aluminide coatings applied on pure nickel was studied by in-depth …

The service lives of nickel superalloys are often limited by environmental degradation. The
present study compares oxidation, sulfidation and hot corrosion at 750° C of three variants of …

The oxidation behavior of AlCoCrFeNi 2.1 eutectic high-entropy alloy (EHEA) with Y-Hf co-
doping under thermal cycling conditions at 1100° C and 1200° C is studied in comparison to …

The reaction of nickel with Na 2 SO 4 was studied in an O 2–0.1 SO 2 atmosphere at 700° C,
conditions typical of type II hot corrosion. The interaction of NiO with the sulfate was …

The corrosion performance of water-based slurry aluminide coatings elaborated on iron-and
nickel-based materials is investigated in molten chlorides as candidate heat transfer fluids …