TiC–NiCr thermal spray coatings as an alternative to WC-CoCr and Cr3C2–NiCr
G Bolelli, A Colella, L Lusvarghi, S Morelli, P Puddu… - Wear, 2020 - Elsevier
TiC-based hardmetal coatings containing 25 or 40 vol% Ni-20 wt% Cr matrix (hereafter TiC–
25NiCr and TiC–40NiCr) were obtained by High Velocity Oxygen-Fuel (HVOF) and High …
25NiCr and TiC–40NiCr) were obtained by High Velocity Oxygen-Fuel (HVOF) and High …
Effect of carbon nanotubes on microhardness and adhesion strength of high-velocity oxy-fuel sprayed NiCr–Cr3C2 coatings
M Kuruba, G Gaikwad, J Natarajan… - Proceedings of the …, 2022 - journals.sagepub.com
NiCr–Cr3C2 coatings are widely used for high temperature and tribological applications due
to their high hardness, oxidation, and wear resistance properties. In the present …
to their high hardness, oxidation, and wear resistance properties. In the present …
Effect of heat treatment on erosion-corrosion behavior of electroless Ni-P coatings in saline water
B Jiang, SL Jiang, AL Ma, YG Zheng - Materials and Manufacturing …, 2014 - Taylor & Francis
To prevent premature failure of heat exchanger tubes enduring rapid seawater flow,
amorphous electroless Ni-P coatings were prepared on copper-nickel alloy (CuNi 90/10) …
amorphous electroless Ni-P coatings were prepared on copper-nickel alloy (CuNi 90/10) …
Wear resistance of hypereutectic Fe–Cr–C hardfacing coatings with in situ formed TiC
YF Zhou, YL Yang, J Yang, PF Zhang… - Surface …, 2013 - journals.sagepub.com
With excellent wear resistance, hypereutectic Fe–Cr–C coatings have caused great attention
in the field of surface engineering. In this study, the hypereutectic Fe–Cr–C hardfacing …
in the field of surface engineering. In this study, the hypereutectic Fe–Cr–C hardfacing …
Effect of zirconium addition in HVOF sprayed Ni–20Cr coating
High velocity oxyfuel spraying was used to deposit Ni–20Cr coating on an ASTM-SA213-
T22 boiler steel with and without 1% Zr addition. High temperature oxidation behaviour of …
T22 boiler steel with and without 1% Zr addition. High temperature oxidation behaviour of …
[图书][B] Electrodeposition and Tribological Behavior of Ni-MoS2 Composite Coatings
L Wu - 2022 - search.proquest.com
Electroplated Ni has been widely used for protection from mild corrosion and mechanical
damage. The friction and wear resistance of composite coatings were improved by the …
damage. The friction and wear resistance of composite coatings were improved by the …
Furnace fusion of Cu based coatings
L Minglang, H Zhongjia - Surface Engineering, 2014 - journals.sagepub.com
The preparation of Cu based coatings, as well as a novel method for their fusion to a
substrate using an air furnace, was studied. Optical microscopy was used to characterise the …
substrate using an air furnace, was studied. Optical microscopy was used to characterise the …
Study on Titanized Layer Microstructure of T10 Steel by Double Glow Plasma Surface Alloying Technique
XL Hong, CL Cui, TF Sun, XC Wei… - Materials Science Forum, 2016 - Trans Tech Publ
The titanized layer was prepared on the surface of T10 steel using a double glow plasma
surface alloying (DGPSA) technique. The titanized layer was characterized by SEM and …
surface alloying (DGPSA) technique. The titanized layer was characterized by SEM and …
Microstructure of TiC Produced by Laser Cladding Using Ni+ C Mixing Powder on Ti–6Al–4V Substrate
YH Liu, J Li, FZ Xuan - Journal of Advanced Microscopy …, 2013 - ingentaconnect.com
TiC reinforced Ni-based coating on Ti–6Al–4V was produced by laser cladding using Ni+ C
mixing powder. Microstructure images showed that TiC was high content, high crystallinity …
mixing powder. Microstructure images showed that TiC was high content, high crystallinity …