Dye sensitized solar cells go beyond using perovskite and spinel inorganic materials: A review
A Alizadeh, M Roudgar-Amoli… - … and Sustainable Energy …, 2022 - Elsevier
The inorganic perovskite and spinel materials have exhibited lots of desirable characteristics
which make them promising materials for usage in dye sensitized solar cells (DSSCs) …
which make them promising materials for usage in dye sensitized solar cells (DSSCs) …
Account of Structural, Theoretical, and Photovoltaic Properties of ABO3 Oxide Perovskites Photoanode‐Based Dye‐Sensitized Solar Cells
In terms of addressing the rapid global energy demand while simultaneously suppressing
important environmental issues from an economic aspect, dye‐sensitized solar cell (DSSC) …
important environmental issues from an economic aspect, dye‐sensitized solar cell (DSSC) …
A clean approach of biodiesel production from waste cooking oil by using single phase BaSnO3 as solid base catalyst: Mechanism, kinetics & E-study
The current policies of govt. of India on biodiesel production and commercialization have
encouraged to explore this area widely. In this study barium stannate perovskite was …
encouraged to explore this area widely. In this study barium stannate perovskite was …
Rapid fabrication of SnO 2 nanoparticle photocatalyst: computational understanding and photocatalytic degradation of organic dye
Y Li, Q Yang, Z Wang, G Wang, B Zhang… - Inorganic Chemistry …, 2018 - pubs.rsc.org
Metal oxides have attracted an increasing attention for the photo-degradation of organic
containments. Deep understanding of the physical parameters correlated with the …
containments. Deep understanding of the physical parameters correlated with the …
Auspicious energy conversion performance of dye-sensitized solar cells based on Gd2O3-impregnated SmTiO3 perovskite/TiO2 nanocomposite photoelectrodes
A Alizadeh, Z Shariatinia - Electrochimica Acta, 2023 - Elsevier
Two series of nanocomposite photoanodes were synthesized for dye-sensitized solar cells
(DSSCs) including samarium titanate (x% SmTiO 3)/TiO 2 nanocomposites (x= 2, 4, 6 and …
(DSSCs) including samarium titanate (x% SmTiO 3)/TiO 2 nanocomposites (x= 2, 4, 6 and …
Perovskite BaSnO3 nanoparticles for solar-driven bi-functional photocatalytic activity: PEC water splitting and Wastewater treatment
The highly crystalline n-type BaSnO 3 nanoparticles with size∼ 30 nm, a larger surface area
of∼ 15.11 m 2· g− 1, and a wide optical band gap of 3.24 eV have been synthesized using a …
of∼ 15.11 m 2· g− 1, and a wide optical band gap of 3.24 eV have been synthesized using a …
[HTML][HTML] Morphology modulated brookite TiO2 and BaSnO3 as alternative electron transport materials for enhanced performance of carbon perovskite solar cells
Designing alternatives to TiO 2 electron-transport layers (ETLs) for facile electron extraction
and transport to enhance the efficiency of nip structured carbon perovskite solar cells …
and transport to enhance the efficiency of nip structured carbon perovskite solar cells …
Thermal Insulation Performance of Novel Coated Fabrics Based on Fe-Doped BaSnO3 Near-Infrared Reflectance Pigments
J Wang, A Han, M Ye, C Chen, X Chen… - … Sustainable Chemistry & …, 2021 - ACS Publications
In this paper, a series of coated fabrics based on Fe-doped BaSnO3 (BaSn1–x Fe x O3− δ,
x= 0.00, 0.05, 0.10, 0.20, 0.25) powder pigments were prepared. The results indicate that the …
x= 0.00, 0.05, 0.10, 0.20, 0.25) powder pigments were prepared. The results indicate that the …
Effect of Interfacial Polarization on the Trap Passivation and Dielectric Constant of SrF2/TiO2 for Dye-Sensitized Solar Cells
A dye-sensitized solar cell (DSSC) architecture is presented with the high dielectric SrF2
incorporated into a semiconducting TiO2 photoanode (SrF2/TiO2). Polarization at the …
incorporated into a semiconducting TiO2 photoanode (SrF2/TiO2). Polarization at the …
Quasi-solid-state dye-sensitized solar cells for efficient and stable power generation under room light conditions
S Venkatesan, IP Liu, CW Li… - ACS Sustainable …, 2019 - ACS Publications
Highly efficient quasi-solid-state dye-sensitized solar cells (QS-DSSCs) are fabricated using
nanocomposite gel electrolytes and applied under room light conditions (200 lx). To obtain …
nanocomposite gel electrolytes and applied under room light conditions (200 lx). To obtain …