Nowadays, magnesium (Mg) alloys are promising lightweight structural materials, especially
in transportation and aerospace fields, due to their inherent low density and high specific …

Magnesium, the lightest structural metal, is approximately four times lighter than steel—the
most widely used metal in industrial applications. Currently available Mg alloys, however …

Pure magnesium (Mg) develops a strong basal texture after conventional processing of hot
rolling or extrusion. Consequently, it exhibits anisotropic mechanical properties and is …

Nanotructural evolution and grain refinement leading to heterogeneous bimodal structure
were investigated during thermomechanical processing in carbon-containing FeMnCoCr …

A TD-split basal texture with two peaks highly tilted from the normal direction (ND) towards
the transverse direction (TD) is usually developed in Mg-Zn-Ca plates and can effectively …

Low absolute strength becomes one major obstacle for the wider applications of low/no rare-
earth (RE) containing Mg alloys. This review firstly demonstrates the importance of grain …

Abstract Two Mg alloys, Mg–1Zn–1Ce–0.6 Zr and Mg–1Zn–1Gd–0.6 Zr (wt.%), were
subjected to large strain hot rolling treatment, followed by annealing at different …

In this study, dynamic precipitation was observed in ZK60 (Mg-6.0 Zn-0.5 Zr) alloy during low
temperature extrusion. The microstructure and mechanical properties of the alloy were …

The unique combination of biodegradability, biocompatibility, and functionality of zinc (Zn)-
based alloys makes them highly desirable for a wide range of medical applications …

Tweaking the amount of precipitation and solute segregation is a successful strategy
employed in modern micro-alloyed Mg alloys to tailor the microstructure and texture towards …