Evolution from microfibers to nanofibers toward next-generation ceramic matrix composites: A review

X Zhang, X Wang, W Jiao, Y Liu, J Yu, B Ding - Journal of the European …, 2023 - Elsevier
Ceramic matrix composites (CMCs) are designed to overcome the main drawback of
monolithic ceramics, namely their brittleness, and are constituently expressed as a …

Nanoindentation and mechanical properties of materials at submicro-and nanoscale levels: Recent results and achievements

YI Golovin - Physics of the Solid State, 2021 - Springer
The review is dedicated to characteristics of the mechanical behavior of various materials at
submicro-and nanoscale levels. To a large extent, progress in this area is determined by the …

[HTML][HTML] Comparison of toughening mechanisms in natural silk-reinforced composites with three epoxy resin matrices

K Yang, Z Wu, C Zhou, S Cai, Z Wu, W Tian… - Composites Part A …, 2022 - Elsevier
Natural silk fibre can reinforce the polymer matrix for composites with improved toughness
and impact strength. However, the optimum selection of matrices for the mechanical …

[HTML][HTML] The oxide-layer configuration alteration and pseudo-ductile crack propagation mechanisms in composites induced by different relative thicknesses of CVI HfC …

X Shi, T Feng, W Hou, J Ding, X Liu, H Lin… - Composites Part B …, 2023 - Elsevier
Abstract Carbon fiber-reinforced HfC-SiC ceramic matrix composites (C f/HfC-SiC) with
different HfC-SiC matrix thicknesses were prepared by the chemical vapor infiltration …

In-situ characterization on crack propagation behavior of SiCf/SiC composites during monotonic tensile loading

C Yang, S Wu, S Wu, X Liu, Z Zhao - Journal of the European Ceramic …, 2022 - Elsevier
The microstructure and crack propagation path of 2.5 D SiC f/SiC composites were observed
by synchrotron radiation x-ray computed micro tomography (SR-μCT) equipped with in-situ …

[HTML][HTML] Microstructure and Mechanical Properties of Alumina Composites with Addition of Structurally Modified 2D Ti3C2 (MXene) Phase

T Cygan, J Wozniak, M Petrus, A Lachowski, W Pawlak… - Materials, 2021 - mdpi.com
This study presents new findings related to the incorporation of MXene phases into ceramic.
Aluminium oxide and synthesised Ti3C2 were utilised as starting materials. Knowing the …

Analysis of the fracture behavior and mechanism of PIP-C/SiC composites at high temperatures

K Wang, C Xu, B Gao, L Song, S Meng - Composite Structures, 2024 - Elsevier
The high-temperature fracture toughness of C/SiC composites is of great significance for the
tolerance assessment and safety application of components in service. In this work …

Small-scale mechanical testing

V Jayaram - Annual Review of Materials Research, 2022 - annualreviews.org
This article reviews recent developments in small-scale mechanical property testing with
some emphasis on intermediate (meso) length scales in complex microstructures and …

Recent development of high-entropy transitional carbides: a review

D Yu, J Yin, B Zhang, X Liu, Z Huang - Journal of the Ceramic …, 2020 - jstage.jst.go.jp
In recent years, the rapid development of aerospace technology has been greatly
associated with the development of materials science. The temperatures of sharp leading …

Degradation mechanisms of SiC/BN/SiC after low temperature humidity exposure

OG Diaz, K Marquardt, S Harris, L Gale… - Journal of the European …, 2020 - Elsevier
The environmental degradation of SiC/BN/SiC CMCs under low temperature water exposure
is still an unexplored field. This work shows how the effect of low temperature humid …