At present, the bonding of polymer composites to titanium is a problem, which has not been
fully resolved. Previous research has shown that bond strengths can be significantly …

A considerable weight reduction in thermoset-based composite is attained by replacing
mechanical fasteners with a structural adhesive during the secondary bonding. The quality …

CF-PEEK composites were manufactured by 3D-printing using a novel FDM methodology
and customized printer and were compared with their cast counterparts. The …

Schubspannungs-Gleitungs-Diagramme werden nach dem Verschiebungsmessverfahren
aufgestellt. Die Messung dieser Verschiebung erfolgt entweder mittels eines Extensiometers …

In the present paper, the following topics are reviewed in detail:(a) the available adhesives,
as well as their recent advances,(b) thermodynamic factors affecting the surface …

This study focuses on the surface modification of polyethersulfone (PES) ultrafiltration (UF)
membranes using corona air plasma in order to reduce membrane fouling during separation …

This report describes modification of titanium surfaces by means of a laser ablation process
that generates microcolumnar arrays (MCA) and thereby increases the adhesive bond …

Autohesion (direct-bonding or self-bonding) is the formation of bonds between two surfaces
of an identical polymer at elevated temperature (usually just above T g). It is an emerging …

We present a method to improve the impact damage tolerance of thermoset resin matrix
composites by exploiting thermoplastic material impact resistance properties. Two …

The phase inversion parameters of membranes prepared from lab-synthesized poly (ether
ether ketone) polymers BPAPEEK and TBPEEK are investigated to tune their performance …