Microstructure, mechanical properties, and reinforcement mechanism of second-phase reinforced TiC-based composites: a review
H Mao, Y Zhang, J Wang, K Cui, H Liu, J Yang - Coatings, 2022 - mdpi.com
TiC ceramics have the characteristics of high melting point and density, and titanium
reserves on earth are extremely large; therefore, TiC ceramics are considered ultra-high …
reserves on earth are extremely large; therefore, TiC ceramics are considered ultra-high …
Effect of TiC content on the mechanical and corrosion properties of Inconel 718 alloy fabricated by a high-throughput dual-feed laser metal deposition system
D Kong, C Dong, X Ni, L Zhang, C Man, G Zhu… - Journal of alloys and …, 2019 - Elsevier
In this work, Inconel 718 alloys with different TiC contents were fabricated one time
successfully by a joint powder-fed laser metal deposition (LMD) system with two …
successfully by a joint powder-fed laser metal deposition (LMD) system with two …
Ultrafine TiB2-TiNiFeCrCoAl high-entropy alloy composite with enhanced mechanical properties
This paper introduces a novel TiB 2− 10 wt% TiNiFeCrCoAl high-entropy alloy (HEA)
composite with an enhanced hardness and indentation fracture toughness. Comparing with …
composite with an enhanced hardness and indentation fracture toughness. Comparing with …
Pressureless sintering of submicron titanium carbide powders
Utilizing laboratory-synthesized submicron powders, monolithic titanium carbide (TiC) was
sintered to a relative density of~ 95.7% through pressureless sintering (PS) at a temperature …
sintered to a relative density of~ 95.7% through pressureless sintering (PS) at a temperature …
TiNiFeCrCoAl high-entropy alloys as novel metallic binders for TiB2-TiC based composites
This paper studies the utilization of TiNiFeCrCoAl high-entropy alloys (HEA) as the metallic
binders (10 wt%) in various ceramic matrix (TiB 2, 60 wt% TiB 2–40 wt% TiC, TiC). Using …
binders (10 wt%) in various ceramic matrix (TiB 2, 60 wt% TiB 2–40 wt% TiC, TiC). Using …
Processing and characterization of TiB2‐TiNiFeCrCoAl high‐entropy alloy composite
A series of TiB2‐TiNiFeCrCoAl high‐entropy alloy (HEA) composites with HEA contents of 5,
10, and 20 wt.% were fabricated to a relative density of above 95% without applied external …
10, and 20 wt.% were fabricated to a relative density of above 95% without applied external …
Microstructural, mechanical and friction properties of nano-graphite and h-BN added TiC-based composites
In this study, a graphite and h-BN added TiC-based ceramic was produced by spark plasma
sintering at 1900° C. The sinterability of the graphite-doped sample could be improved …
sintering at 1900° C. The sinterability of the graphite-doped sample could be improved …
Sintering and mechanical properties of TiB2-TiC-Ni using submicron borides and carbides
A series of TiB 2-TiC-Ni composites were prepared to develop materials with enhanced
mechanical properties for structural application. Submicron TiB 2-TiC powders were …
mechanical properties for structural application. Submicron TiB 2-TiC powders were …
[HTML][HTML] Microstructure, mechanical properties and high temperature tribological behavior of NiAl-based composites
B Li, H Guo, C Li, Y Gao, L Feng, Y Pan… - Journal of Materials …, 2022 - Elsevier
NiAl-based composites were fabricated in-situ using vacuum hot-press sintering technology.
The Ti 3 AlC 2, TiC and Ti 3 Al were formed during the sintering process, and the intensity of …
The Ti 3 AlC 2, TiC and Ti 3 Al were formed during the sintering process, and the intensity of …
Oxidation of spark plasma sintered ZrC-Mo and ZrC-TiC composites
Abstract Two ZrC-based composites, ZrC-20 wt% Mo cermet and ZrC-20 wt% TiC solid
solution mixed carbide, were prepared by spark plasma sintering. A sample of pure ZrC was …
solution mixed carbide, were prepared by spark plasma sintering. A sample of pure ZrC was …