Thermally stable nanostructured Al-Mg alloy with relaxed grain boundaries
W Xu, B Zhang, K Du, XY Li, K Lu - Acta Materialia, 2022 - Elsevier
Grain refinement into the nanoscale greatly hardens metals and alloys but reduces the
stability. By means of cryogenic plastic deformation at very high strain rates, a high …
stability. By means of cryogenic plastic deformation at very high strain rates, a high …
[HTML][HTML] Severe plastic deformation for producing Superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review
Ultrafine-grained and heterostructured materials are currently of high interest due to their
superior mechanical and functional properties. Severe plastic deformation (SPD) is one of …
superior mechanical and functional properties. Severe plastic deformation (SPD) is one of …
[HTML][HTML] Interface-dominated mechanical behavior in advanced metal matrix composites
Metal matrix composites (MMCs) incorporate a reinforcing or functional secondary phase
into a metal matrix to achieve specific properties. Of the parameters which may affect the …
into a metal matrix to achieve specific properties. Of the parameters which may affect the …
Strength, plasticity, thermal stability and strain rate sensitivity of nanograined nickel with amorphous ceramic grain boundaries
A large fraction of grain boundaries imparts high strength to nanocrystalline (NC) metals but
causes the poor thermal stability of microstructures and a significant reduction of strength …
causes the poor thermal stability of microstructures and a significant reduction of strength …
[HTML][HTML] Exploring the anneal hardening phenomenon in nanocrystalline Pt-Ru alloys
Pt and its alloys have important applications in the field of catalysis or in the jewellery
industry. Especially in the latter case sufficient strength is necessary to ensure wear …
industry. Especially in the latter case sufficient strength is necessary to ensure wear …
Experimental and numerical investigations of plastic strain mechanisms of AISI 316L alloys with bimodal grain size distribution
In this article, the plastic strain mechanisms of AISI 316L with bimodal grain size distributions
are investigated using experimental characterizations and numerical simulations. Using …
are investigated using experimental characterizations and numerical simulations. Using …
Deformation and tribological behavior of ductile refractory high-entropy alloys
Refractory high-entropy alloys have attracted widespread attention as potential structural
materials for high temperature applications. However, there is limited understanding of their …
materials for high temperature applications. However, there is limited understanding of their …
[HTML][HTML] Thermally activated deformation mechanisms and solid solution softening in W-Re alloys investigated via high temperature nanoindentation
J Kappacher, A Leitner, D Kiener, H Clemens… - Materials & Design, 2020 - Elsevier
Thermally activated deformation mechanisms in three different W-Re alloys were
investigated by performing high temperature nanoindentation experiments up to 800° C …
investigated by performing high temperature nanoindentation experiments up to 800° C …
Significant annealing-induced hardening effect in nanolaminated-nanotwinned (CrCoNi) 97.4 Al0. 8Ti1. 8 medium-entropy alloy by severe cold rolling
Due to the easy coarsening caused by poor thermal stability, the verified annealing-induced
hardening in nanograined metals can only maintain at a relatively low-temperature range. In …
hardening in nanograined metals can only maintain at a relatively low-temperature range. In …
The influence of microstructure and texture on the hardening by annealing effect in cold-rolled titanium
K Majchrowicz, A Sotniczuk… - Journal of Alloys and …, 2023 - Elsevier
The purpose of this study was to compare the influence of microstructural and textural
changes on the hardening by annealing effect in cold-rolled titanium. Ultrafine-grained …
changes on the hardening by annealing effect in cold-rolled titanium. Ultrafine-grained …