[HTML][HTML] Polyurethane foams loaded with carbon nanofibers for oil spill recovery: Mechanical properties under fatigue conditions and selective absorption in oil/water …
Marine pollution due to spillage of hydrocarbons represents a well-known current
environmental problem. In order to recover the otherwise wasted oils and to prevent …
environmental problem. In order to recover the otherwise wasted oils and to prevent …
Investigating the mechanical properties and microstructure of the weld joint obtained by laser welding of PA12/CNT nanocomposites
In this article, the 3D printed polyamide12/carbon nanotube (PA12/CNT) nanocomposites
were joined using laser welding. The factorial design method was applied to study the effect …
were joined using laser welding. The factorial design method was applied to study the effect …
Surface treatment of ultra-high molecular weight polyethylene (UHMWPE) by cold atmospheric plasma (CAP) for biocompatibility enhancement
J Turicek, N Ratts, M Kaltchev, N Masoud - Applied Sciences, 2021 - mdpi.com
Ultra-high molecular weight polyethylene (UHMWPE) is one of the most commonly used
polymers in joint replacements because of its biologically inert properties and low friction …
polymers in joint replacements because of its biologically inert properties and low friction …
Ultra-High Molecular Weight Polyethylene Modifications Produced by Carbon Nanotubes and Fe2O3 Nanoparticles
Thin sheets of ultra-high molecular weight polyethylene (UHMWPE), both in pristine form
and containing carbon nanotubes (CNTs) or Fe2O3 nanoparticles (NPs) at different …
and containing carbon nanotubes (CNTs) or Fe2O3 nanoparticles (NPs) at different …
Measurement of the structural behaviour of a 3D airless wheel prototype by means of optical non-contact techniques
Additive Manufacturing (AM) is becoming a widely employed technique also in mass
production. In this field, compliances with geometry and mechanical performance standards …
production. In this field, compliances with geometry and mechanical performance standards …
Response to fatigue stress of biomedical grade polyethylene joints welded by a diode laser
Biomedical grade UHMWPE double lap joint, welded by a diode laser, has been
mechanically characterized by static and dynamic tests. A nanocomposite sheet (UHMWPE …
mechanically characterized by static and dynamic tests. A nanocomposite sheet (UHMWPE …
Assessment of the strain field induced under load in transforaminal lumbar interbody fusion cage printed in additive manufacturing
Transforaminal lumbar interbody fusion (TLIF) cages are used to reduce compression on the
neural tissue of the spine and to restore the intervertebral space. Today, these medical …
neural tissue of the spine and to restore the intervertebral space. Today, these medical …
Mechanical characterization of nanocomposite joints based on biomedical grade polyethylene under cyclical loads
Polymeric joints, made of biomedical polyethylene (UHMWPE) nanocomposite sheets, were
welded with a diode laser. Since polyethylene does not absorb laser light, nanocomposites …
welded with a diode laser. Since polyethylene does not absorb laser light, nanocomposites …
White/light white polyethylene joints obtained by diode laser welding process
Diode laser source was successfully employed for the fabrication of joints comprising
nanocomposites of biomedical-grade UHMWPE and small amounts of carbon nanoparticles …
nanocomposites of biomedical-grade UHMWPE and small amounts of carbon nanoparticles …
Gold nanoparticles for physics and bio-medicine applications
Gold nanoparticles were prepared by laser ablation in water and then characterized through
physical analyses, in the perspective to be employed for different applications in the fields of …
physical analyses, in the perspective to be employed for different applications in the fields of …