This paper presents proposed characteristics of the SN curve using the 2 and 3-parameter
Weibull distribution for fatigue limit and limited life respectively. The parameters of the …

The fatigue resistance of welded connections made of high strength steel (HSS) is one of the
most important topics for the application of HSS in the construction sector. One of the most …

Due to the time-consuming and costly nature of high-cycle fatigue experiments, correlations
between fatigue strength and mechanical properties obtained through more simple and fast …

A new proposal of generalization of the fatigue Kohout-Věchet (KV) model for different
fatigue damage parameters is proposed. The purpose of this generalized model is to …

The early fatigue cracking of orthotropic steel decks has been a long-standing problem for
heavy traffic regions of China's long-span bridges. However, the actual fatigue life is much …

This study focuses on influence of alloying content and type of manufacturing on the
effectiveness of deep cryogenic treatment (DCT) on properties of selected high-alloyed …

Compared with the nominal and hot-spot stress, the effective notch stress could present
more accurate stress state by involving the notch stress induced by weld bead. Inspired by …

Applying Goodman, Gerber, Soderberg and Elliptical failure theories does not make it
possible to determine the span of failure times (cycles to failure-N i) of a mechanical …

The permanent magnet semi-direct drive cutting transmission system of shearer is taken as
the research object, the non-linear dynamic model of the system is established and the …

A simplified formula for deriving full range S–N curves of steels with ultimate tensile
strength< 1400 N/mm 2 is proposed by combining empirical formulae and a mathematical …