[HTML][HTML] Transformation of long-period stacking ordered structures in Mg-Gd-Y-Zn alloys upon synergistic characterization of first-principles calculation and experiment …
M Li, G Zhang, S Yin, C Wang, Y Fu, C Gu… - Journal of Magnesium and …, 2024 - Elsevier
Based on experiments and first-principles calculations, the microstructures and mechanical
properties of as-cast and solution treated Mg-10Gd-4Y-xZn-0.6 Zr (x= 0, 1, 2, wt.%) alloys …
properties of as-cast and solution treated Mg-10Gd-4Y-xZn-0.6 Zr (x= 0, 1, 2, wt.%) alloys …
Hot deformation behavior and microstructure evolutions of as-forged Mg-Gd-Y-Zn-Zr alloy
J Cai, L Chen, P Han, J Yang, Q Yang, Q Li… - Journal of Materials …, 2022 - Elsevier
The hot deformation behavior of Mg-9.16 Gd-3.03 Y-1.44 Zn-0.61 Zr alloy was examined by
hot compression experiments at 623–753 K with strain rates 0.1–20 s− 1. Flow stress-strain …
hot compression experiments at 623–753 K with strain rates 0.1–20 s− 1. Flow stress-strain …
Hydroxyapatite-carboxymethyl cellulose-graphene composite coating development on AZ31 magnesium alloy: Corrosion behavior and mechanical properties
In this study, hydroxyapatite (HA) coatings containing carboxymethyl cellulose (CMC) and
graphene (Gr) were developed on AZ31 magnesium alloy through two-step electrophoretic …
graphene (Gr) were developed on AZ31 magnesium alloy through two-step electrophoretic …
Enhancing strength and ductility of low-cost rare earth Mg-5Y-Ni alloy containing LPSO phase fabricated via multi-pass rolling based on dislocation regulation and …
Y Zhou, C Liu, Q Luo, Q Li - Materials Characterization, 2022 - Elsevier
A low-cost rare earth Mg-5Y-Ni alloy containing LPSO phase was fabricated via multi-pass
rolling in this work, and strength and ductility were enhanced based on dislocation …
rolling in this work, and strength and ductility were enhanced based on dislocation …
Microstructure evolution and microhardness of Mg-13Gd-4Y–2Zn-0.5 Zr alloy via pre-solution and multi-directional forging (MDF) process
B Dong, X Che, Z Zhang, J Yu, M Meng - Journal of Alloys and Compounds, 2021 - Elsevier
Abstract The Mg-13Gd-4Y–2Zn-0.5 Zr (wt.%) alloy containing high-content long-period
stacking ordered (LPSO) phases is pre-solutioned prior to multi-directional forging (MDF) …
stacking ordered (LPSO) phases is pre-solutioned prior to multi-directional forging (MDF) …
[HTML][HTML] Synergistic effects of grain refinement and texture weakening on mechanical properties anisotropy of Mg-9Gd-4Y-2Zn-0.4 Zr alloy via RUE processing
Z Li, J Yu, D Lu, G Wu, Z Zhang, Q Zhang… - Journal of Materials …, 2022 - Elsevier
The effect of repetitive upsetting and extruding (RUE) on microstructure, texture and
mechanical properties anisotropy of Mg-9Gd-4Y–2Zn-0.4 Zr alloy was investigated. The …
mechanical properties anisotropy of Mg-9Gd-4Y–2Zn-0.4 Zr alloy was investigated. The …
Microstructural regulation, work hardening and fracture behavior of Tip reinforced Mg‐xGd‐2Y‐3Zn (x= 5, 7, 9 wt%) composites
F Cao, K Deng, C Wang, K Nie, Q Shi, W Zhang… - Journal of Alloys and …, 2024 - Elsevier
In this work, Ti p/Mg‐xGd‐2Y‐3Zn (x= 5, 7, 9 wt%, Ti p/GWZx23) composites were fabricated
using semi-solid stirring casting and hot extrusion. The Ti p/Mg laminar-like configuration …
using semi-solid stirring casting and hot extrusion. The Ti p/Mg laminar-like configuration …
[HTML][HTML] Unraveling the effect of deformation-induced phase transformation on microstructure and micro-texture evolution of a multi-axially forged Mg-Gd-Y-Zn-Zr alloy …
SM Ramezani, A Zarei-Hanzaki… - journal of materials …, 2021 - Elsevier
The effect of blocky to lamellar phase transformation on the microstructure and micro-texture
of a Magnesium-Rare earth alloy containing long-period stacking order (LPSO) phases were …
of a Magnesium-Rare earth alloy containing long-period stacking order (LPSO) phases were …
[HTML][HTML] On the microstructure and RE-texture evolution during hot tensile deformation of Mg-Gd-Y-Zn-Zr alloy
This study was conducted to investigate the correlation between the microstructure/texture
evolutions and the high temperature flow behavior of Mg-8.3 Gd-3.6 Y-1.6 Zn-0.5 Zr (wt.%) …
evolutions and the high temperature flow behavior of Mg-8.3 Gd-3.6 Y-1.6 Zn-0.5 Zr (wt.%) …
Phase transformation, texture evolution, and mechanical properties of Mg-9.5 Gd-4Y-2Zn-0.3 Zr alloy wires fabricated using hot drawing
M Chen, Z Ling, L Wang, K Ma, DD Zhang, Y Li… - Materials Science and …, 2024 - Elsevier
Abstract Mg-9.5 Gd-4Y-2Zn-0.3 Zr alloy wires with a diameter of 1.2 mm were fabricated by a
multistage drawing process with a cumulative area reduction (CAR) of 96% at 500° C using …
multistage drawing process with a cumulative area reduction (CAR) of 96% at 500° C using …