Grain boundary engineering (GBE) is considered to be an attractive approach to
microstructure control, which significantly enhances the grain-boundary-related properties of …

The spheroidization behavior of γ′ phase and dynamic recrystallization (DRX) mechanisms
of a novel HIPed powder metallurgy (P/M) superalloy deformed at high temperatures (1080 …

Hot compression tests of a novel hot-extruded (HEXed) P/M nickel-based superalloy at the
temperature of 1020–1110° C with the strain rate of 0.001–1 s− 1 were carried out on a …

The corrosion behaviors of two types of FeCrAl alloys were investigated in static oxygen-
saturated lead bismuth eutectic (LBE) at 550° C for up to 8000 h. It was found that the oxide …

The influence of effective strains with a range from 1.1 to 2 on the corrosion resistance of
GH4710 superalloy in chloride solutions was studied by potentiodynamic polarization …

In this work, the hot deformation behavior and dynamic recrystallization mechanisms of
GH4975 prepared by electron beam smelting layered solidification were studied. The friction …

In this study, hot compression bonding was first applied to join 14Cr ferrite steel at
temperatures of 950–1200° C and strains of 0.11–0.51 under strain rates of 0.01–30 s− 1 …

Dynamic microstructural evolution and recrystallization mechanism during hot deformation
of intermetallic-hardened duplex Fe-9Al-10.8 Mn-4.5 Ni-0.7 C (wt.%) lightweight steel have …

In this work, a series of isothermal hot compression tests were performed at the temperature
of 900–1150° C with the strain rate ranging from 0.01 to 10s− 1 in Inconel X-750 alloy …

In present study, isothermal compression, solution treatment, electron backscatter diffraction
(EBSD) and transmission electron microscopy (TEM) observations were carried out to …