[HTML][HTML] Processing of polymer matrix composites using microwave energy: A review
Search for novel energy-efficient, eco-friendly, and time-saving manufacturing techniques
has gained momentum in the recent times. Polymer composites have been increasingly …
has gained momentum in the recent times. Polymer composites have been increasingly …
Microwave dielectric heating: Applications on metals processing
Microwave material processing is a novel energy efficient technology with improved
mechanical properties, minimized defects and economical and environmental advantages …
mechanical properties, minimized defects and economical and environmental advantages …
Microwave chemical and materials processing
S Horikoshi, RF Schiffmann, J Fukushima… - … Chemical and Materials …, 2018 - Springer
Research on human evolution reports that our ancestors learned how to cook using fire; it
became a developmental turning point, enlarging their brains. Secondary benefits of fire …
became a developmental turning point, enlarging their brains. Secondary benefits of fire …
Investigation of solid particle erosion behavior of Al-Al2O3 and Al-ZrO2 metal matrix composites fabricated through powder metallurgy technique
The proposed research article presents an experimental investigation of solid particle
erosion wear of Al 2 O 3 and ZrO 2 ceramic oxide reinforced metal matrix composite …
erosion wear of Al 2 O 3 and ZrO 2 ceramic oxide reinforced metal matrix composite …
Effect of Fe addition in W-Ni-Cu heavy alloy processed through powder metallurgy on microstructure and mechanical properties
NS Shakunt, A Upadhyaya - Journal of Alloys and Compounds, 2024 - Elsevier
In the present investigation, effect of Fe addition to 90 W-aNi-bCu-xFe,(where a/b was 6/4;
x= 0, 0.5, 1.0, 1.5, and 2.0) on the microstructure and mechanical behaviour of Tungsten …
x= 0, 0.5, 1.0, 1.5, and 2.0) on the microstructure and mechanical behaviour of Tungsten …
Microstructure and mechanical properties of spark plasma sintered tungsten heavy alloys
N Senthilnathan, AR Annamalai… - Materials Science and …, 2018 - Elsevier
Abstract The effect of cobalt (0.5 wt%, 1.0 wt%, 1.5 wt% and 2.0 wt%), as an alloying
element, on the microstructure and mechanical properties of W-Ni-Fe tungsten heavy alloy …
element, on the microstructure and mechanical properties of W-Ni-Fe tungsten heavy alloy …
Fine-grained 93W–5.6 Ni–1.4 Fe heavy alloys with enhanced performance prepared by spark plasma sintering
Y Li, K Hu, X Li, X Ai, S Qu - Materials Science and Engineering: A, 2013 - Elsevier
Blended 93W–5.6 Ni–1.4 Fe powders were sintered via the spark plasma sintering (SPS)
technique. Fine-grained 93W–5.6 Ni–1.4 Fe heavy alloys (W grain size is about 6µm) with …
technique. Fine-grained 93W–5.6 Ni–1.4 Fe heavy alloys (W grain size is about 6µm) with …
Joining of mild steel pipes using microwave hybrid heating at 2.45 GHz and joint characterization
The present experimental study was carried out to explore the possibility of joining mild steel
(MS) pipes using microwave hybrid heating (MHH) technique. Candidate MS pipes, with a …
(MS) pipes using microwave hybrid heating (MHH) technique. Candidate MS pipes, with a …
Effect of rare earth metals (Y, La) and refractory metals (Mo, Ta, Re) to improve the mechanical properties of W–Ni–Fe Alloy—A Review
Tungsten heavy alloys are two-phase metal matrix composites that include W–Ni–Fe and W–
Ni–Cu. The significant feature of these alloys is their ability to acquire both strength and …
Ni–Cu. The significant feature of these alloys is their ability to acquire both strength and …
Effect of microwave and conventional heating on sintering behavior and properties of Al–Mg–Si–Cu alloy
C Padmavathi, A Upadhyaya, D Agrawal - Materials chemistry and physics, 2011 - Elsevier
Effect of heating mode and sintering temperature on sinterability and properties of the 6711
(Al–1Mg–0.8 Si–0.25 Cu) alloy was investigated. Alloy compacts were consolidated in …
(Al–1Mg–0.8 Si–0.25 Cu) alloy was investigated. Alloy compacts were consolidated in …