Dimensions of the injection-molded semi-crystalline materials (polymeric products)
decrease with the time that elapses from their formation. The post-molding shrinkage is an …

Metal-polymer hybrid (MPH) injection molding is an innovative manufacturing process with
vast potential in today industries. This article reviews MPH, covering its introduction …

The purpose of this research is to find the optimal operating point in the production process
of the cumene. Therefore, the production process was optimized through statistical and …

In recent years, expanding the seafood production has led to dramatic increases in the
volume and pollution of wastewater produced by this industry. In this study, anaerobic …

Cellular injection molding is a common method of modifying polymer materials aimed at
reducing the sink marks on moldings' surfaces while reducing their weight. However, the …

Injection molding is a popular production process for short fiber reinforced components. The
mechanical properties of such components depend on process-induced fiber orientations …

The main objective of the present article is to obtain the optimum technological parameters
of the automobile plastic front‐end frame. Moldflow software was used to simulate the …

The paper presents the results of investigations of processability and mechanical properties
of polypropylene composites filled with microsilica, which is waste from the metallurgical …

Scanning acoustic microscopy (SAM) is used to characterize welds in a thermoplastic
polymer (ABS) manufactured by injection-molding, particularly at the locations of weld-lines …

Residual wall thickness is an important indicator for water‐assisted injection molding
(WAIM) parts, especially the maximization of hollowed core ratio and minimization of wall …