This paper deals with the investigation of electrochemical behaviour of copper in a sodium
tetraborate (borax) solution in the presence and absence of chloride ions. The influence of …

Complementary surface and near-surface analytical techniques have been used to explore
a brass (Cu–20Zn) surface before, during, and after exposure in air at 90% relative humidity …

The electrochemical corrosion behaviors of Fe41Co7Cr15Mo14C15B6Y2 bulk metallic
glasses (BMGs) were investigated by immersion tests and potentiodynamic polarization …

(Cu47Zr11Ti34Ni8) 100− xMox bulk metallic glasses (BMGs) with x= 0, 1 and 2at.% and a
bulk metallic glass matrix composite with x= 5at.% were successfully prepared by water …

In-situ metallic glass matrix composites (MGMCs) are a new kind of promising structural
engineering material. In this study, a comprehensive study about the corrosion behavior of in …

The corrosion behavior study was conducted on a novel Fe 77 Mo 5 P 9 C 7.5 B 1.5 in-situ
metallic glass matrix composite (MGMC). This composite sample was developed by …

Bulk glassy alloys (BGAs) of Fe80− xNixP13C7 (x= 0, 5, 15 and 25 at.-%) with the diameters
up to 2· 5 mm were prepared by the combination method of fluxing treatment and J …

(Cu47Zr11Ti34Ni8) 100− xMox bulk metallic glasses (BMGs) with x= 0, 1 and 2at% were
prepared by water-cooled copper mold casting. The effect of the addition of a small amount …

The investigation described in this paper was conducted with the aim of determining
electrochemical behaviour of CuAlNiSi alloy in a solution of sodium tetraborate (borax) at pH …

We have performed first-principles calculations to study the surface metal–metal bonding
and energetics that control desorption on metal and alloy surfaces. The adsorbed and …