A review of iron carbonate (FeCO3) formation in the oil and gas industry
R Barker, D Burkle, T Charpentier, H Thompson… - Corrosion …, 2018 - Elsevier
This paper reviews the information in the literature relating to FeCO 3 formation in the
context of oil and gas production. Numerous factors which influence the kinetics, physical …
context of oil and gas production. Numerous factors which influence the kinetics, physical …
Corrosion of pipeline steel in dense phase CO2 containing impurities: A critical review of test methodologies
Characterising the corrosion behaviour of pipeline steels in impurity-containing dense
phase CO 2 is essential for the cost-effective deployment of carbon capture and storage …
phase CO 2 is essential for the cost-effective deployment of carbon capture and storage …
Internal corrosion of carbon steel pipelines for dense-phase CO2 transport in carbon capture and storage (CCS) – a review
R Barker, Y Hua, A Neville - International Materials Reviews, 2017 - journals.sagepub.com
Carbon Capture and Storage (CCS) has been highlighted as a potential method to enable
the continued use of fossil-fuelled power stations through the abatement of carbon dioxide …
the continued use of fossil-fuelled power stations through the abatement of carbon dioxide …
The formation of FeCO3 and Fe3O4 on carbon steel and their protective capabilities against CO2 corrosion at elevated temperature and pressure
Y Hua, S Xu, Y Wang, W Taleb, J Sun, L Zhang… - Corrosion …, 2019 - Elsevier
This study investigates the corrosion performance of X65 carbon steel at elevated
temperatures (up to 250° C) and CO 2 partial pressures (up to 28.5 bar pCO 2). A detailed …
temperatures (up to 250° C) and CO 2 partial pressures (up to 28.5 bar pCO 2). A detailed …
Carbon capture, utilization and storage (CCUS) pipeline steel corrosion failure analysis: A review
Y Zhou, F Xie, D Wang, Y Wang, M Wu - Engineering Failure Analysis, 2024 - Elsevier
Abstract Carbon Capture, Utilization and Storage (CCUS) technology has been identified as
a viable method of reducing greenhouse gas emissions in the environment. A full CCUS …
a viable method of reducing greenhouse gas emissions in the environment. A full CCUS …
Corrosion challenges in supercritical CO2 transportation, storage, and utilization—a review
Research activities for Carbon capture, utilization, and storage (CCUS) have been rapidly
growing due to climate goals and investment opportunities over the past few decades. This …
growing due to climate goals and investment opportunities over the past few decades. This …
Investigation of the effects of small flow rate and particle impact on high temperature CO2 corrosion of N80 steel
Z Wang, Y Zhao, M Liu, H Shen, Q Fang, J Yao - Corrosion Science, 2022 - Elsevier
The effects of flow rate and particle-wall impact on CO 2 corrosion of N80 steel at high
temperature were studied by surface analysis techniques and computational fluid dynamics …
temperature were studied by surface analysis techniques and computational fluid dynamics …
Improvement on the CO2 corrosion prediction via considering the corrosion product performance
A mechanistic model for general CO 2 corrosion of carbon steel with protective iron
carbonate (FeCO 3) scales in the temperature range between 30∼ 90° C, and CO 2 partial …
carbonate (FeCO 3) scales in the temperature range between 30∼ 90° C, and CO 2 partial …
[HTML][HTML] The effect of cooling rate-induced microstructural changes on CO2 corrosion of low alloy steel
The effect of cooling rate-induced microstructural changes on corrosion resistance in a CO 2-
saturated 3.5 wt% NaCl solution have been explored for the API L80–1Cr steel. The …
saturated 3.5 wt% NaCl solution have been explored for the API L80–1Cr steel. The …
Effect of calcium carbonate on low carbon steel corrosion behavior in saline CO2 high pressure environments
The CaCO 3 influence on the corrosion properties of low carbon steel in aqueous solutions
saturated with CO 2 and NaCl at 80° C and 15 MPa was investigated over time with respect …
saturated with CO 2 and NaCl at 80° C and 15 MPa was investigated over time with respect …