To lower the cost of electricity produced, advanced high-efficiency power cycles operating at
temperatures above 600° C (such as the supercritical CO 2 Brayton cycle) are presently …

High-temperature corrosion of critical components such as water walls and superheater
tubes in biomass/waste-fired boilers is a major challenge. A dense and defect-free thermal …

Molten salt mixtures with alkali and alkaline earth metal chlorides were developed for high-
temperature sensible thermal energy storage in support of concurrent efforts to develop high …

The effect of cold-rolling on the microstructure and molten salt corrosion behaviour of 316L
alloy was investigated. Corrosion tests were performed in FLiNaK salt at 600° C for 300 h …

This study investigated the performances of micro-and near-nanocrystalline coatings of WC-
17 wt.% Co applied to a steel substrate using the high-velocity oxy-fuel (HVOF) spraying …

Solar power is a sustainable and affordable source of energy, and has gained interest from
academies, companies, and government institutions as a potential and efficient alternative …

Bi-layer coating systems comprising a Cr 3 C 2-NiCr coating with different underlying
coatings of Ni, NiCr, NiCoCrAlY, and CoNiCrAlY were deposited on 304L stainless steel …

In this work, a hydroxyethyl-imidazoline derivate based on coffee oil has been synthesized
and evaluated as an inhibitor of corrosion for carbon steel in CO 2-saturated (3% NaCl+ …

In this work the corrosion resistance of a high content nickel alloy, Inconel 600, was
investigated in mixed NaCl‐KCl salts at 700, 800, and 900° C for 100 hours in static air …

The electrochemical behavior of the Ni5Al coating deposited by an electric arc was
evaluated. Its behavior was evaluated in a saline solution as a function of temperature (20° …