The synergetic effects of strontium (Sr) and rare earth elements (RE) on the modification of
the microstructure and enhancement of the mechanical properties of as-cast Mg–9Al–1Zn …

The synergistic effects of copper addition and hot extrusion process on the modification of
microstructure and enhancement of mechanical properties of a common in situ hypereutectic …

Microstructure and mechanical properties of Al–15Mg2Si–x TiB2 hybrid composites in the as-
cast and wrought conditions were studied. TiB2 addition led to a significant refinement and …

In order to improve mechanical properties of Mg 2 Si/Al composites, Eu element was added
to modify Mg 2 Si morphology, and T6 heat treatment was used to control Mg 2 Si …

Al based composites reinforced with γ–Al 2 O 3, AlB 2 and Al 13 Fe 4 particles were
synthesized via sintering the Al–2.5 Fe 2 O 3–7.5 B 2 O 3, Al–5Fe 2 O 3–5B 2 O 3 and Al …

The mechanical performance of as-cast and hot extruded Mg-4Si-4Ni-x Ca alloys was
studied. In the as-cast microstructures, the dendritic primary Mg 2 Si particles, eutectic α-Mg+ …

In this paper, in-situ ZrB 2/AA6016 particle-reinforced aluminum matrix composites were
prepared in molten A6016 aluminum alloy melt by KBF 4-Al-K 2 ZrF 6 reaction system. For …

The microstructures and mechanical properties of the in situ Mg–4Si–6Ni–x Y (x= 0, 0.3, 0.6,
and 0.9 wt-% Y) composites were studied in this research. Y addition and hot extrusion …

To modify the microstructure and improve the tensile properties of Al–Mg2Si alloys, different
contents of Eu are added into near‐eutectic Al–Mg2Si alloys by melting. Results show that …

This study investigates the wear characteristics of Al–25Mg2Si composite synthesized via
gravity casting. The research aims to understand the influence of applied load, test …