Sigma phase is a deleterious phase which can be formed in duplex stainless steels (DSSs)
during heat treatment, manufacturing, or welding processes, leading to a decrease of …

A series of aging treatments at the temperature range of 650–975° C for different time
intervals in a solution-treated 2205 duplex stainless steel were carried out. The …

A commercial 2205 duplex stainless steel with three different solution treatments (at 1020,
1080 and 1200° C for 3 min) followed by continuous cooling at four respective cooling rates …

A aberration. Any error that causes image degradation. Such an error may be chromatic,
spherical, astigmatic, or comatic and can result from design, execution, or both. See also …

The present study concerns the influence of ageing parameters on the microstructure and
mechanical properties of a duplex stainless steel. Microstructural evolution is extremely …

The formation of the secondary phases in the 2205 duplex stainless steel (DSS) influences
greatly its mechanical properties. Studies on the microstructural evolution and coarsening …

Early thermal damage in 2205 duplex stainless steel which is caused by the precipitation of
second phases during a short term exposure to high temperature (700° C) is investigated …

Correlative electron backscatter diffraction (EBSD) and scanning Kelvin probe force
microscopy (SKPFM) analysis has been carried out to characterise microstructure …

The effect of ageing temperature and holding time on the precipitation of secondary phases
and the mechanical properties of a 25Cr–6.7 Ni–0.32 N–3.0 Mo–2.5 W super duplex …

In duplex stainless steels the ideally 1: 1 ratio of austenite-to-ferrite phases ensures the
outstanding mechanical and corrosion properties compared to other, conventional stainless …