The present work focuses on the determination of transient mold–environment and metal–
mold heat transfer coefficients during solidification. The method uses the expedient of …

Direct strip casting is a continuous casting process for producing metallic sheet directly from
the molten state that minimises the need for substantial secondary processing. This …

Transient heat transfer in the early stages of solidification of an alloy on a water-cooled chill
and the consequent evolution of microstructure, quantified in terms of secondary dendrite …

Interfacial heat-transfer coefficients were measured during the solidification of Al-Si alloys
against coated die steel chills with varying chill temperature, coating thickness and coating …

The heat-transfer coefficient was measured during the unidirectional solidification of Al-7 wt
pct Si alloy castings against a water-cooled Cu chill. Heat-transfer coefficients in the range of …

The interfacial heat transfer coefficient (IHTC) at the metal-sand mold interface was
determined by applying a nonlinear inverse estimation method during the low pressure sand …

This paper focuses on the determination of the interfacial heat transfer coefficient (IHTC) at
the metal–die interface in the high pressure die casting (HPDC) process. Experiment was …

The heat transfer at the metal-die interface is believed to have great influence on the
solidification process and cast structure of the high-pressure die-casting (HPDC) process …

The roles of the melt and the mould material on the cooling curve parameters and the heat
transfer at the casting/mould interface during solidification of Al (356) alloy and its …

The present work focuses on the relationships between solidification thermal parameters
and the dendritic microstructure of an AISI 304 stainless steel solidified both in a strip casting …