Review on experimental and theoretical investigations of ultra-short pulsed laser ablation of metals with burst pulses
DJ Förster, B Jäggi, A Michalowski… - Materials, 2021 - mdpi.com
Laser processing with ultra-short double pulses has gained attraction since the beginning of
the 2000s. In the last decade, pulse bursts consisting of multiple pulses with a delay of …
the 2000s. In the last decade, pulse bursts consisting of multiple pulses with a delay of …
Scanning strategies in laser surface texturing: A review
D Moskal, J Martan, M Honner - Micromachines, 2023 - mdpi.com
Laser surface texturing (LST) is one of the most promising technologies for controllable
surface structuring and the acquisition of specific physical surface properties needed in …
surface structuring and the acquisition of specific physical surface properties needed in …
Short and long term surface chemistry and wetting behaviour of stainless steel with 1D and 2D periodic structures induced by bursts of femtosecond laser pulses
G Giannuzzi, C Gaudiuso, R Di Mundo, L Mirenghi… - Applied Surface …, 2019 - Elsevier
We investigate the short and long term wettability of laser textured stainless steel samples in
order to better understand the interplay between surface topography and chemistry. Very …
order to better understand the interplay between surface topography and chemistry. Very …
[HTML][HTML] Tailoring the wettability of surface-textured copper using sub-THz bursts of femtosecond laser pulses
In this work, copper surfaces were textured with sub-Terahertz bursts of femtosecond pulses.
The wettability of Cu textured surfaces was investigated by measuring the static water …
The wettability of Cu textured surfaces was investigated by measuring the static water …
Ultrashort single-pulse laser ablation of stainless steel, aluminium, copper and its dependence on the pulse duration
J Winter, M Spellauge, J Hermann, C Eulenkamp… - Optics express, 2021 - opg.optica.org
In this work, we investigate single-pulse laser ablation of bulk stainless steel (AISI304),
aluminium (Al) and copper (Cu) and its dependence on the pulse duration. We measured …
aluminium (Al) and copper (Cu) and its dependence on the pulse duration. We measured …
High efficiency femtosecond laser ablation with gigahertz level bursts
G Bonamis, K Mishchick, E Audouard… - Journal of Laser …, 2019 - pubs.aip.org
The authors report on a simple and easy-to-use GHz amplified femtosecond laser source.
The laser source is based on a passively mode-locked oscillator with a near GHz repetition …
The laser source is based on a passively mode-locked oscillator with a near GHz repetition …
Numerical simulation and experimental study on picosecond laser ablation of stainless steel
X Wang, Y Huang, C Li, B Xu - Optics & Laser Technology, 2020 - Elsevier
A fundamental study of the interaction between ultrashot laser and stainless steel will be
useful in understanding the ablation characteristics and optimizing the ablation …
useful in understanding the ablation characteristics and optimizing the ablation …
Threshold fluence and incubation during multi-pulse ultrafast laser ablation of quartz
In this work, the incubation effect on the laser ablation threshold of quartz, after multi-shot
irradiation with femtosecond pulses at 1030-nm-wavelength with different repetition rates …
irradiation with femtosecond pulses at 1030-nm-wavelength with different repetition rates …
One-step femtosecond laser stealth dicing of quartz
We report on a one-step method for cutting 250-µm-thick quartz plates using highly focused
ultrashort laser pulses with a duration of 200 fs and a wavelength of 1030 nm. We show that …
ultrashort laser pulses with a duration of 200 fs and a wavelength of 1030 nm. We show that …
Super-efficient drilling of metals with ultrafast non diffractive laser beams
A highly efficient drilling process is found in non-transparent metallic materials enabled by
the use of non-diffractive ultrafast Bessel beams. Applied for deep drilling through a 200 μm …
the use of non-diffractive ultrafast Bessel beams. Applied for deep drilling through a 200 μm …