[HTML][HTML] Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
The evolution of the new microstructures produced by two types of dynamic recrystallization
is reviewed, including those brought about by severe plastic deformation (SPD). The …
is reviewed, including those brought about by severe plastic deformation (SPD). The …
A review of dynamic recrystallization phenomena in metallic materials
The dynamic recrystallization (DRX) phenomena occurring in different thermo-mechanical
processing (TMP) conditions for various metallic materials are reviewed. Several types of …
processing (TMP) conditions for various metallic materials are reviewed. Several types of …
Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation
The dynamic recrystallization (DRX) behavior of a typical nickel-based superalloy is
investigated by the hot compression tests. Based on the conventional DRX kinetics model …
investigated by the hot compression tests. Based on the conventional DRX kinetics model …
Experimental and numerical investigation of microstructure and mechanical behavior of titanium/steel interfaces prepared by explosive welding
Q Chu, M Zhang, J Li, C Yan - Materials Science and Engineering: A, 2017 - Elsevier
This paper presents a systematic study of structure and mechanical behavior of Ti/Fe
explosive-bonded interfaces. The transient fluid-like behavior at the bonding zone is …
explosive-bonded interfaces. The transient fluid-like behavior at the bonding zone is …
A different attempt to improve the formability of aluminum tailor welded blanks (TWB) produced by the FSW
M Abbasi, B Bagheri, A Abdollahzadeh… - International Journal of …, 2021 - Springer
Tailor welded blanks (TWBs) are produced by welding blanks with different characteristics
as such thickness and/or coating and/or material, etc. The forming characteristics of a TWB …
as such thickness and/or coating and/or material, etc. The forming characteristics of a TWB …
Deformation based additive manufacturing of a metastable high entropy alloy via Additive friction stir deposition
Additive friction stir deposition (AFSD) is a novel solid-state additive manufacturing process
which offers unique capability of producing 3-D parts with no solidification related defects …
which offers unique capability of producing 3-D parts with no solidification related defects …
Constitutive relationships for hot deformation of austenite
Constitutive equations were used to derive the flow stress of a 17–4 PH stainless steel
during hot compression testing. Two general methods were used:(i) a conventional method …
during hot compression testing. Two general methods were used:(i) a conventional method …
Multiscale modeling of discontinuous dynamic recrystallization during hot working by coupling multilevel cellular automaton and finite element method
Discontinuous dynamic recrystallization (dDRX) is considered an effective way to obtain fine
grain microstructures during hot working of materials with low-to-medium stacking fault …
grain microstructures during hot working of materials with low-to-medium stacking fault …
Study on constitutive modeling and processing maps for hot deformation of medium carbon Cr–Ni–Mo alloyed steel
C Zhang, L Zhang, W Shen, C Liu, Y Xia, R Li - Materials & Design, 2016 - Elsevier
The hot deformation behavior of medium carbon Cr–Ni–Mo alloyed steel 34CrNiMo was
studied in the wide temperature range of 900–1150° C and the strain rate of 0.002–5 s− 1 …
studied in the wide temperature range of 900–1150° C and the strain rate of 0.002–5 s− 1 …
[HTML][HTML] A critical assessment of experimental investigation of dynamic recrystallization of metallic materials
Dynamic recrystallization (DRX) often takes place during hot deformation of metallic
materials, which then exerts significant influence on the final microstructures and …
materials, which then exerts significant influence on the final microstructures and …