Creep fracture is a general failure mode for nickel-based superalloy components made by
additive manufacturing (AM). However, the existing creep models originally built for …

Electrical discharge machining (EDM) is a widely used manufacturing process for machining
hard or high melting point metals. A characteristic feature of this process is a brittle, porous …

The application of Inconel 718 (IN718) alloy parts at elevated-temperature under loading
leads to creep failure. To date, the creep performance of additively manufactured IN718 is …

Additive manufacturing lends itself well to the manufacture of aerospace parts due to the
high complexity and small volume of many components found in modern aero engines. By …

Understanding ballistic behavior of structural materials is important for their applications in
aeronautical and astronautical industries. We investigate perforation of 2-mm thick Inconel …

This work is concerned with determining the effect of powder reusing during fabrication of
Inconel 718 via laser powder bed fusion (LPBF) on tensile, compressive, and creep strength …

The creep property is the decisive criterion for the high-temperature application of Hastelloy
X (HX alloy) and the carbides have been reported to play an important role in the creep …

In this study, the selective electron beam melting (SEBM) process was used to fabricate
Inconel 718 superalloy, and their microstructures and creep resistances were investigated …

Laser powder bed fusion (LPBF) manufactured Inconel 718 superalloy (IN718) parts exhibit
inferior creep properties compared to their conventionally manufactured (CM) counterparts …

Abstract The creep behavior and damage mechanisms of 718 alloys were investigated at
800–900° C in air. The fracture morphology and microstructure evolution were observed by …