A specially designed setup was used to apply a constant load to a thin sheet sample of
AA2024-T3 and, using microfocal X-ray radiography, to observe in situ the resulting …

Industrial interest in wrought heat-treatable aluminium-lithium (Al–Li) based alloys dates
back to around 1919 in Germany. However the exploitation of these alloys has historically …

It is well known that alloying additions of lithium to precipitation age hardened Al-Cu base
alloys lowers the density while increasing the modulus (1–2). Al-Li-Cu alloys provide good …

Al-Li alloys are one of the groups of materials used in the modern aircraft industry. Their
mechanical properties make them very attractive for this application. A considerable plastic …

Abstract A 1441 Al-Li-Cu-Mg-Zr alloy in the peak-aged T8 temper was subjected to
retrogression treatment and immediately reaged to various tempers. Transmission electron …

The influence of retrogression and reaging (RR) treatment on the resistance to stress—
corrosion cracking of a commercial AlLi 8090 alloy was investigated. The retrogression was …

An evaluation was conducted of the corrosion behavior of 8090 aluminum-lithium (Al-Li)
alloy (UNS A98090), when aged under various conditions and subjected to corrosion in a …

An investigation was made into the influence of a retrogression and reaging treatment on the
microstructure, tensile properties, and stress corrosion cracking resistance of 8090 Al–Li …

A detailed microstructural investigation into possible metallurgical culprits of stress corrosion
cracking (SCC) of Al-Li-Cu alloy AA2096 was carried out as a function of isothermal aging …

La corrosión bajo tensiones (SCC) es un problema de gran importancia en las aleaciones
de aluminio de máxima resistencia (serie Al-Zn-Mg-Cu). La utilización de tratamientos …