Technical and cost evaluation on SMES for electric power compensation

S Nomura, T Shintomi, S Akita, T Nitta… - IEEE Transactions …, 2010 - ieeexplore.ieee.org
RASMES (Research Association of Superconducting Magnetic Energy Storage) in Japan
developed a road map of SMES for fluctuating electric power compensation of renewable …

Electromagnetic, mechanical and thermal performance analysis of the CFETR magnet system

Y Ren, J Zhu, X Gao, F Shen, S Chen - Nuclear Fusion, 2015 - iopscience.iop.org
Abstract The Chinese Fusion Engineering Test Reactor (CFETR) superconducting magnet
system was designed by the National Integration Design Group for Magnetic Confinement …

Development of JT-60SA superconducting magnet system

K Yoshida, K Tsuchiya, K Kizu, H Murakami… - … and its applications, 2010 - Elsevier
The upgrade of JT-60U magnet system to superconducting coils (JT-60SA) is progressing by
both parties of Japanese government and European commission in the framework of the …

Alleviation of power fluctuation in interconnected power systems with wind farm by SMES with optimal coil size

M Saejia, I Ngamroo - IEEE transactions on applied …, 2011 - ieeexplore.ieee.org
The large penetration of wind power into interconnected power systems causes the severe
power fluctuation in tie-lines. To alleviate power fluctuation, the superconducting magnetic …

JT-60SA magnet system status

S Davis, WA Maksoud, P Barabaschi… - IEEE Transactions …, 2017 - ieeexplore.ieee.org
The JT-60SA experimental device will be the world's largest superconducting tokamak when
it is assembled in 2019 in Naka, Japan (R= 3 m, a= 1.2 m). It is being constructed jointly by …

The manufacturing of the superconducting magnet system for the JT-60SA

K Yoshida, K Kizu, K Tsuchiya… - IEEE transactions on …, 2011 - ieeexplore.ieee.org
JT-60SA is the satellite tokamak for ITER in the Broader Approach agreement. The JT-60SA
uses 18 toroidal field coils, a central solenoid with 4 modules, and 6 equilibrium field coils …

Performance of a folded-strip toroidally wound induction machine

BB Jensen, AG Jack, GJ Atkinson… - IEEE Transactions on …, 2011 - ieeexplore.ieee.org
This paper presents the measured experimental results from a four-pole toroidally wound
induction machine, where the stator is constructed as a prewound foldable strip. It shows …

Status of JT-60SA tokamak under the EU-JA Broader Approach Agreement

M Matsukawa, M Kikuchi, T Fujii, T Fujita… - Fusion Engineering and …, 2008 - Elsevier
JT-60SA is a fully superconducting coil tokamak to be built under the framework of the EU-
JA Broader Approach Agreement, and it aims to contribute to the complement of the ITER …

Neutronic analysis of the JT-60SA toroidal magnets

R Villari, P Barabaschi, A Cucchiaro… - Fusion engineering and …, 2009 - Elsevier
In the present study a complete neutronic analysis has been performed for the current
design of the JT-60SA toroidal field coil (TFC) system. The MCNP5 Monte Carlo code has …

Upgrading the NIFS superconductor test facility for JT-60SA cable-in-conduit conductors

T Obana, K Takahata, S Hamaguchi, N Yanagi… - Fusion engineering and …, 2009 - Elsevier
The superconductor test facility at the National Institute for Fusion Science (NIFS) was
upgraded to test cable-in-conduit (CIC) conductors for the JT-60SA equilibrium field (EF) …