[HTML][HTML] Functional coatings or films for hard-tissue applications
Metallic biomaterials like stainless steel, Co-based alloy, Ti and its alloys are widely used as
artificial hip joints, bone plates and dental implants due to their excellent mechanical …
artificial hip joints, bone plates and dental implants due to their excellent mechanical …
The effect of grain orientation on nanoindentation behavior of model austenitic alloy Fe-20Cr-25Ni
Instrumented nanoindentation was used to investigate the hardness, elastic modulus, and
creep behavior of an austenitic Fe-20Cr-25Ni model alloy at room temperature, with the …
creep behavior of an austenitic Fe-20Cr-25Ni model alloy at room temperature, with the …
Nitrogen plasma immersion ion implantation treatment to enhance corrosion resistance, bone cell growth, and antibacterial adhesion of Ti-6Al-4V alloy in dental …
HH Huang, DK Shiau, CS Chen, JH Chang… - Surface and Coatings …, 2019 - Elsevier
Abstract Ti-6Al-4V is a biocompatible alloy widely used for dental prostheses. Unfortunately,
the oxide film that forms spontaneously on the surface is bioinert and sometimes prone to …
the oxide film that forms spontaneously on the surface is bioinert and sometimes prone to …
Characterization of fracture toughness for surface-modified layer of 18CrNiMo7-6 alloy steel after carburizing heat treatment by indentation method
Advanced processing of a workpiece, such as by carburization, will modify its surface.
Accurate measurement of fracture toughness of such a surface-modified layer is important …
Accurate measurement of fracture toughness of such a surface-modified layer is important …
Fretting wear behavior of nanocrystalline surface layer of copper under dry condition
YS Zhang, Z Han, K Lu - Wear, 2008 - Elsevier
Unlubricated fretting tests were performed with a nanocrystalline surface layer of a 99.99
wt.% copper fabricated by means of surface mechanical attrition treatment (SMAT), in …
wt.% copper fabricated by means of surface mechanical attrition treatment (SMAT), in …
Fretting wear behaviour of surface mechanical attrition treated alloy 718
Alloy 718 was subjected to surface mechanical attrition treatment (SMAT) using SAE 52100
steel balls of a 5mm diameter for four different treatment durations (15, 30, 45 and 60min) …
steel balls of a 5mm diameter for four different treatment durations (15, 30, 45 and 60min) …
Effect of oxygen plasma immersion ion implantation treatment on corrosion resistance and cell adhesion of titanium surface
CH Yang, YT Wang, WF Tsai, CF Ai… - Clinical oral implants …, 2011 - Wiley Online Library
Objective: The study was to investigate the corrosion resistance and cell adhesion of
titanium (Ti) surface for dental implant application by oxygen plasma immersion ion …
titanium (Ti) surface for dental implant application by oxygen plasma immersion ion …
Wear in superelastic shape memory alloys: A thermomechanical analysis
Abstract Shape Memory Alloys (SMAs) have shown superior mechanical properties
including improved wear resistance compared to their conventional counterparts of the …
including improved wear resistance compared to their conventional counterparts of the …
Cavitation erosion resistance of NiTi thin films produced by Filtered Arc Deposition
In this study, NiTi thin films were obtained by using a Filtered Arc Deposition System (FADS).
X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive …
X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive …
Phase composition and wear behavior of NiTi alloys
S Gialanella, G Ischia, G Straffelini - Journal of materials science, 2008 - Springer
This study deals with the wear behavior of two NiTi shape memory alloys, one of them being
martensitic, the other one austenitic at room temperature. Wear tests have been conducted …
martensitic, the other one austenitic at room temperature. Wear tests have been conducted …