Ceramic materials typically have to be sintered at high temperatures, often above 1000 C.
This precludes the coating of lower-melting substrate materials, such as metals, glasses and …

A novel method for depositing ceramic thick films by aerosol deposition (AD) is presented.
Submicron ceramics particles are accelerated by gas flow up to 100–500 m/s and then …

Cold spray (CS) technology is a “solid-phase particle deposition process without melting”;
however, it has been established as an additive manufacturing technology that can be …

The nano-particle deposition system (NPDS) is a new dry spray process used to deposit
metal and ceramic particles at room temperature. Low temperature deposition techniques for …

The aerosol deposition method (ADM) is a novel coating process that works at room
temperature without a high‐temperature plasma and arc discharge, unlike the existing …

Piezoelectric ceramics are envisioned as cell stimulating materials for in-vivo, load-bearing
applications. To compensate for their brittle nature developing ceramic films on medically …

Aerosol deposition (AD) is an efficient technique for customized coating of various
substrates. The small particles of AD yield a dense coating layer with small voids. AD is …

Dense ceramic coatings can be fabricated through the kinetic impaction of fine solid
particles at room temperature without any heat assistance or binder, and such a coating …

Aerosol deposition method (ADM) is a technique to form dense films by impacting solid
particles to a substrate at room temperature. To improve the deposition efficiency in ADM …

Conventional thin-film processing techniques remain inadequate for obtaining superior
dense ceramic thick films. The incompatibility of ceramic films prepared via other methods …