The dynamic recrystallization (DRX) process and grain structure evolution during friction stir
welding determine the final microstructure and performance of weld joints. In this study …

The hot deformation behavior of Al-Mg-Si alloys was investigated by isothermal
compression tests in a temperature range from 400° C to 550° C and a strain rate range from …

Metal forming is not only shaping the form of a product, it is also influencing its mechanical
and physical properties over its entire volume. Advanced analysis methods recently enable …

The present work explored the impacts of temperature, strain rate, strain and initial
orientation on hot-compression behavior and microstructural evolvement of hot-extruded …

Extruded profiles/sections are increasingly used in the transport industry for lightweight
structures. In this paper, a wide thin-ribbed aluminium profile with asymmetric Z-shape, was …

Recently, an efficient integrated forging process has been proposed in which solutionized
aluminum alloy extruded bars are directly hot forged and quenched. In this study, the hot …

The conventional forging process for 6082 aluminum alloy entails the following steps:
preheating, hot forging, solution heat treatment (SHT), and artificial aging. In this study, 6082 …

The hot deformation behavior of Al-Mg-Si alloy is studied based on diffusion mechanism.
The quantity of low angle grain boundaries increases rapidly, accompanied by the formation …

The dynamic recrystallization (DRX) behavior and microstructure evolution of an Al-Mg-Si
aluminum alloy (AA6N01) during hot deformation are investigated by experiments and …

The hot deformation behavior of a newly developed AA6099 alloy was investigated after
homogenization. To this end, Gleeble® isothermal hot compression tests were performed at …