Abstract Samples of Mg-8.2 Gd-3.8 Y-1.1 Zn-0.4 Zr alloy with and without an intragranular
lamellae-shaped long period stacking ordered (LPSO) phase were prepared through heat …

The popular constitutive models used in the field of hot forming of magnesium alloys can be
divided into phenomenological models, machine learning models, and internal state …

This work performed a CALPHAD-guided design strategy to develop high strength-ductility
Mg–Y–Al alloy by taking advantage of the strengthening effect of the LPSO phase and the …

The hot tensile behavior of a low-alloyed ultra-high strength (LUHS) steel is studied by
performing the isothermal tensile tests under different tensile processing parameters (strain …

Titanium (Ti) particles reinforced AZ91 matrix composite (Ti p/AZ91) was prepared by
powder metallurgy method. In the present work, we investigated the hot deformation …

The influence of trace (3 vol%) silicon carbide particle (SiC p) addition on the hot
deformation behavior of the Mg-5wt.% Zn (Mg–5Zn) alloy was studied through the hot …

The effects of original orientations on the dynamic recrystallization (DRX) behaviors of a hot-
rolled Mg-1.0 wt% Ca plate were investigated in this work. Using hot compression along the …

In this paper, a unified internal state variable (ISV) model for predicting microstructure
evolution during hot working process of AZ80 magnesium alloy was developed. A novel …

Uniaxial thermal tensile testing at a wide temperature range (473–723 K) and strain rate
(0.01-1s− 1). The isothermal hot tensile deformation and fracture behavior of AZ31 …

By carrying out hot compression experiments for 316 L austenitic stainless steel under
dynamic changes in deformation conditions, the work hardening and softening behaviors …