During the past decade, considerable research effort has been directed towards the
development of in situ metal matrix composites (MMCs), in which the reinforcements are …

In situ Ti-6Al-4V/TiB discontinuously reinforced composites, containing 20 and 40% of TiB
whiskers by volume, were produced by blending Ti, Al/V, and TiB2 powders. The …

The influence of the Al content and the addition of further alloying elements on the cast
microstructure of γ (TiAl)+ α2 (Ti3Al) alloys has been examined. The results show that …

During the past decade, considerable research efforts have been directed towards
developing metal matrix composites (MMCs) by means of the reactive processing technique …

In situ TiB whisker reinforced Ti-4.0 Fe-7.3 Mo matrix composites have been fabricated by
spark plasma sintering (SPS). The microstructure of the in situ TiB whiskers and interfacial …

Interfacial reaction between titanium matrix and reinforcement plays a crucial role in
determining the mechanical properties of titanium metal matrix composite materials. In order …

The solidification of γ-TiAl alloys with relatively low (< 2 at. pct) additions of boron is
discussed. Binary Ti-Al alloys containing 49 to 52 at. pct Al form primary α-(Ti) dendrites from …

The elastic moduli, shear moduli and the Poisson ratios of four different in-situ processed
titanium (Ti) composites consisting of titanium monoboride (TiB) whiskers were measured …

The tensile creep behavior of suction-cast and heat-treated Ti–48Al–2Cr–2Nb (at. pct.,
SC4822) alloy featuring aligned lamellar microstructure with fine lamellae was investigated …

To improve the wear resistance of 6061 aluminum alloy, we have reported the fabrication of
in-situ TiB 2-TiC reinforced Fe-Al composite coatings by laser alloying with Fe-based self …