Permanent disposal of high level nuclear waste in containers that employ steel as a
structural element and copper as a corrosion barrier material is a favoured design concept in …

The effect of M 23 C 6 precipitates on the pitting behavior of 0Cr13 martensitic stainless steel
(MSS) was investigated. The results revealed that the precipitates in the 0Cr13 MSS with …

The intergranular corrosion susceptibility in supermartensitic stainless steel (SMSS)
weldments was investigated by the double loop–electrochemical potentiokinetic reactivation …

Nanopeening treatment was applied to the AISI 420 steel to decrease its sensitivity to
tribocorrosion damage. The microstructural investigation highlighted that the nanopeening …

The effect of friction stir welding (FSW) on the pitting corrosion resistance of a lean duplex
stainless steel was investigated in chloride-containing and chloride-free electrolytes. FSW …

Pitting corrosion was studied in welded joints of supermartensitic stainless steels. The
electrochemical behavior of three different weldment zones (weld metal (WM), parent metal …

The transformation mechanism of reverted austenite and the amount of reverted austenite
during the tempering process in supermartensitic stainless steel have been investigated by …

The effect of N content on the microstructure and wear resistance of 4Cr13 corrosion-
resistant plastic mold steel were investigated by scanning electron microscopy, transmission …

Welding of 6mm thick AISI: 410S lean super martensitic stainless steel (LSMSS) under
different heat input of 7.97, 8.75 and 10.9 kJ/cm was carried out by gas tungsten arc welding …

Supermartensitic stainless steel pipes were radial friction (RF) welded and their corrosion
properties were determined based on electrochemical tests. Measurements were performed …