Counter-gravity casting (CGC) is a widely adopted material processing technique in metals
due to its notable benefits, including enhanced filling behavior, reduced defect occurrence …

Low-pressure casting and high-pressure casting processes are the most common liquid-
based technologies used to produce aluminum components. Processing conditions such as …

This research paper is a proof-of-concept based on the application of a fully integrated CAE
tools to improve the quality of castings produced by the hybrid LPSC process, for which …

Gas pores on the top face of engine crankcases which are produced by Low Pressure Die
Casting (LPDC) have been studied. Micrographic analysis has been conducted to …

Tensile strength of aluminum castings has been improved by employing surge and filter in a
conventional non-pressurizing gating system. For this purpose, three non-pressurizing …

This research shows the feasibility of the additive manufacturing technique (AM), Binder
Jetting (BJ), for the production of shell moulds, which are filled by vacuum suction in the field …

In this research, a comparative analysis has been carried out between a traditional sand
casting process and a modern mould obtained by additive manufacturing (AM), in the …

In aluminum low-pressure sand casting process, filling oscillations are observed when the
metal front reaches a section change in a part. The effect of geometry on the filling …

Cellular structures are a classic route to obtain high values of specific mechanical
properties. This characteristic is advantageous in many fields, from diverse areas such as …

An ideal velocity curve for the operation of a casting machine is derived based on physical
laws or numerical analysis when we control pouring velocity in gravity casting, plunger …