Investigation on dispersion parameters of Molybdenum Oxide thin films via Wemple–DiDomenico (WDD) single oscillator model
DJ Borah, ATT Mostako - Applied Physics A, 2020 - Springer
In this paper, the dispersion parameters of Molybdenum Oxide thin films viz: oscillator
energy, dispersion energy, transition moments, static refractive index, oscillator strength, and …
energy, dispersion energy, transition moments, static refractive index, oscillator strength, and …
[HTML][HTML] ALD grown nanostructured ZnO thin films: Effect of substrate temperature on thickness and energy band gap
Nanostructured ZnO thin films with high transparency have been grown on glass substrate
by atomic layer deposition at various temperatures ranging from 100° C to 300° C. Efforts …
by atomic layer deposition at various temperatures ranging from 100° C to 300° C. Efforts …
Effects of power and temperature on the structural, anti-icing, wettability, and optical properties of zinc oxide thin films
NP Patel, KV Chauhan, MK Desai - Ceramics International, 2023 - Elsevier
Zinc oxide semiconductors have received significant research attention over the past
decade owing to their diverse applications. In this paper, we report the development and …
decade owing to their diverse applications. In this paper, we report the development and …
Electrochemical degradation of methyl red in zinc hydroxide and zinc oxide thin films, physical and chemical activation
The experimental and ab initio results on structural, optical, and electronic properties of Zn
(OH) 2 and ZnO thin films (TFs) at various annealing temperatures are reported. The as …
(OH) 2 and ZnO thin films (TFs) at various annealing temperatures are reported. The as …
Impact of structural and optical properties tunability of SnSe2 thin films on its optoelectronic properties
AM El-Mahalawy, SA Mansour, AR Wassel… - Surfaces and …, 2022 - Elsevier
As a result of the precise controllability of the properties of tin diselenide and the possibility
of harmonious integration with silicon technology in many applications. Attention was …
of harmonious integration with silicon technology in many applications. Attention was …
Phase change, tuning of optical and dielectric parameters in Bi/S-Se-Sb heterostructure film upon thermal annealing: An experimental and computational approach
The study is based on annealing-induced Bi diffusion into Se 30 S 30 Sb 40 sites that bring
modification in its linear-nonlinear optical, structural, and dielectric properties. The Bi/Se 30 …
modification in its linear-nonlinear optical, structural, and dielectric properties. The Bi/Se 30 …
A facile growth of spray based ZnO films and device performance investigation for Schottky diodes: determination of interface state density distribution
This paper reports on the study of ZnO films grown by chemical spray pyrolysis on glass and
Si substrates at temperatures of 300, 350 and 400° C and on the performances of the …
Si substrates at temperatures of 300, 350 and 400° C and on the performances of the …
Linear and nonlinear optical parameters of biodegradable chitosan/polyvinyl alcohol/sodium montmorillonite nanocomposite films for potential optoelectronic …
MM Elmahdy, MA Yassin - International Journal of Biological …, 2024 - Elsevier
Innovations in sophisticated optoelectronic devices have increased interest in high-refractive
index polymers. Herein, we report innovative nanocomposite films with high linear and …
index polymers. Herein, we report innovative nanocomposite films with high linear and …
Band gap tuning in carbon doped boron nitride mono sheet with Stone-Wales defect: a simulation study
E Almahmoud, JA Talla - Materials Research Express, 2019 - iopscience.iop.org
Tuning the band gap of boron nitride nanosheets is critical to design new nano-based
electronic devices. In this work, we implemented density functional theory to investigate the …
electronic devices. In this work, we implemented density functional theory to investigate the …
Effect of varying low substrate temperature on sputtered aluminium films
Aluminium thin films were sputtered on stainless steels at substrate temperatures (T sub)
varying between 44.5 C and 100 C and at a constant power of 200 W. At low temperatures …
varying between 44.5 C and 100 C and at a constant power of 200 W. At low temperatures …