The depletion of natural resources and the challenge of eliminating industrial wastes are
increasingly driving the development of artificial aggregates. Accelerated carbonation curing …

This study investigated the possibility of employing CO 2 curing for the production of cement-
free artificial aggregates using low-value sintering red mud (SRM) and fly ash (FA). The …

Repurposing sulphidic tailings in construction products offers a sustainable solution for this
mining waste. Aggregates (1–4 mm and 2–8 mm) were produced at pilot scale using cold …

To enhance the stabilization effect of microorganisms and metakaolin on red-bedded
mudstone filler, an innovative approach was introduced by implementing a synergistic …

This study investigates the hydration of basic oxygen furnace (BOF) slag activated by
dipotassium hydrogen phosphate (DKP) up to 3 wt.%. The findings reveal that DKP …

Phosphogypsum-based cementitious materials (PGCM) are commonly selected as
substitutes to ordinary Portland cement (OPC), however, drawbacks, such as a restricted …

A fabricação de cimento Portland (CP) está entre as atividades industriais que mais emitem
gases nocivos à atmosfera. Sua substituição por materiais cimentícios suplementares …

El subproducto principal de la industria arrocera, la cascarilla de arroz, se convierte en una
valiosa materia prima mediante procesos químicos. De esta, se extraen microfibras de …

In this study, the coal gasification ash-slag (CGAS) was activated by grinding and the
chemical composition and mechanical properties of the CGAS and admixture concrete were …