Recent development in friction stir processing as a solid-state grain refinement technique: microstructural evolution and property enhancement
Increasing demand of lightweight structures with exceptional properties elicits materials
processing and manufacturing technologies to tailor blanks in order to achieve or enhance …
processing and manufacturing technologies to tailor blanks in order to achieve or enhance …
Remarkable strength-impact toughness conflict in high-strength Al-Mg-Sc-Zr alloy fabricated via laser powder bed fusion additive manufacturing
Z Wang, X Lin, J Wang, N Kang, Y Hu, D Wang… - Additive …, 2022 - Elsevier
Laser powder bed fusion (LPBF) of AlMgScZr alloys have a combination of high strength
and good ductility, which may apply to damage-tolerant structures. However, there have …
and good ductility, which may apply to damage-tolerant structures. However, there have …
Impact of multiple FSP passes on structure, mechanical, tribological and corrosion behaviors of AA6061/316 stainless-steel reinforced Al matrix composites
Stainless steel particulates were chosen as alternatives to ceramic particles to improve
particle-matrix bonding, toughness, and performance of aluminum metal matrix composites …
particle-matrix bonding, toughness, and performance of aluminum metal matrix composites …
Cast near-eutectic Al-12.5 wt.% Ce alloy with high coarsening and creep resistance
This study investigates the creep behavior of a cast, coarse-grained Al-12.5 wt.% Ce (Al-2.7
at.% Ce) alloy, consisting of an eutectic microstructure (α-Al with~ 11 vol.% submicron Al 11 …
at.% Ce) alloy, consisting of an eutectic microstructure (α-Al with~ 11 vol.% submicron Al 11 …
Effect of hybrid reinforcement and number of passes on microstructure, mechanical and corrosion behavior of WE43 Mg alloy based metal matrix composite
In this work, a hybrid metal matrix composite with WE43 magnesium alloy as matrix and a
hybrid mixture of NiTi, iron, and tin as reinforcement was fabricated using friction stir …
hybrid mixture of NiTi, iron, and tin as reinforcement was fabricated using friction stir …
Investigations on microstructure, thermo-mechanical and tribological behavior of graphene oxide reinforced AA7075 surface composites developed via friction stir …
Surface composites (SCs) are fabricated through reduced graphene oxide (RGO)
particulates by adopting friction stir process (FSP) route to enhance the mechanical and …
particulates by adopting friction stir process (FSP) route to enhance the mechanical and …
Effect of squeeze casting on microstructure and mechanical properties of hypereutectic Al-xSi alloys
R Li, L Liu, L Zhang, J Sun, Y Shi, B Yu - Journal of Materials Science & …, 2017 - Elsevier
The effect of squeeze casting on microstructure and mechanical properties of hypereutectic
Al-x Si alloys (x= 15, 17.5, 22 wt%) was investigated in this study. Results show that …
Al-x Si alloys (x= 15, 17.5, 22 wt%) was investigated in this study. Results show that …
Multi-track multi-layer friction stir additive manufacturing of AA6061-T6 alloy
Friction stir additive manufacturing (FSAM) is a solid-state sheet-based metal additive
manufacturing (MAM) process that utilizes the classical friction stir welding (FSW) process to …
manufacturing (MAM) process that utilizes the classical friction stir welding (FSW) process to …
In situ characterization of tensile behavior of laser rapid solidified Al–Si heterogeneous microstructures
Heterogeneous Al–Si microstructure comprising of sub-micron-scale Al dendrites and
nanoscale Al–Si fibrous eutectic was fabricated by processing as-cast Al-20wt.% Si alloy …
nanoscale Al–Si fibrous eutectic was fabricated by processing as-cast Al-20wt.% Si alloy …
Impact toughness of friction stir processed low carbon steel used in shipbuilding
DM Sekban, SM Aktarer, P Xue, ZY Ma… - Materials Science and …, 2016 - Elsevier
Abstract Effect of single-pass friction stir processing (FSP) on the impact toughness of a low
carbon steel mainly used in shipbuilding was investigated via Charpy impact test at different …
carbon steel mainly used in shipbuilding was investigated via Charpy impact test at different …