Abstract Pristine SiO 2, TiO 2 and composite SiO 2-TiO 2 films of 200 nm thick were coated
on surface of quartz acoustic wave (SAW) sensors with sol-gel and spin coating technique …

In this work magnetite (Fe3O4) nanoparticles coated with titanium dioxide (TiO2) were
prepared by a novel non-thermal method. In this method, magnetite and pure TiO2 (anatase) …

Nitrogen doping was proposed recently as a low-cost means to shift the absorption edge of
titania towards 450–500nm. Results are reported here on the preparation of nitrogen-doped …

The hollow Fe 3 O 4/mesoporous SiO 2/TiO 2 (FST) composite microspheres were prepared
with the multistep coating technique through sol-gel and hydrothermal process. The …

To generate resonance in the ultraviolet (UV) wavelength region, we have developed a
Bragg mirror structure with a SiO2 top layer. This paper shows the wavelength at which …

TiO2 thin films deposited on stainless steel (SS) substrates exhibit low photocatalytic (PC)
activity when calcined above 350° C. The cause is the presence of Fe3+ into the film due to …

Experimental results on femtosecond (fs) laser-induced oxidation of molybdenum (Mo) thin
films are presented. The Mo thin films were deposited on fused silica substrates by the …

Single-phase rutile TiO 2 films with good crystallinity were obtained by thermal oxidation of
sputtered Ti films on Si and quartz substrates. The influence of the Ti film thickness on …

Titanium dioxide (TiO 2) thin films have been deposited with various substrate temperatures
by dc reactive magnetron sputtering method onto glass substrate. The effects of substrate …

Precise surface nanopatterning is a promising route for predictable control of cellular
behavior on biomedical materials. There is currently a gap in taking such precision …