Whenever two or more dissimilar materials are bonded, large jump in the stresses occurred
at the interface during the fabrication will leads to the delamination and poor load-bearing …

Gradient concept is one of the solutions in advanced material design and structure control.
Functionally graded materials (FGMs) are materials which change their composition …

Abstract Functionally Graded Materials (FGM s) represent a novel approach for the
realization of innovative properties and/or functions that conventional homogeneous …

Abstract The Ceramic On-Demand Extrusion (CODE) process has been recently proposed
for additive manufacturing of dense, strong ceramic components via extrusion with uniform …

To overcome the brittleness and the pyrolysis shrinkage of carbon aerogels, carbon fiber
reinforced composites were prepared by copyrolysis of polyacrylonitrile fiber reinforced …

In multilayered structures, sharp interface is formed between the layers of dissimilar
materials. At this interface, the large difference in thermal expansion coefficients of the two …

Green and intelligent manufacturing has become the key direction of industrial production
development. In-situ measuring and sintering simulation technologies play a key role in the …

The isothermal compression tests of Ti17 titanium alloy with lamellar starting microstructure
were conducted on a Gleeble-1500 thermo-mechanical simulator at the deformation …

In the present work, five-layered alumina–iron functionally graded materials (FGMs) were
fabricated via a simple route of die pressing and pressureless sintering. The shrinkage …

In the present work, three different types-layered Al-B4C functionally graded materials were
fabricated via powder metallurgy. The Al-B4C powder mixtures were cold pressed in two …