Graphene and CNT‐based smart fiber‐reinforced composites: a review
Multifunctional fiber‐reinforced polymer (FRP) composites provide an ideal platform for next‐
generation smart composites applications including structural health monitoring, electrical …
generation smart composites applications including structural health monitoring, electrical …
Fiber-reinforced composites in dentistry–An insight into adhesion aspects of the material and the restored tooth construct
Objective This review aimed to highlight the insight into adhesion aspects within the
components of the glass FRC (ie., fiber and matrix) and between resin luting material and …
components of the glass FRC (ie., fiber and matrix) and between resin luting material and …
Designing carbon fiber composite interfaces using a 'graft-to'approach: Surface grafting density versus interphase penetration
This paper examines the effect on interfacial shear strength (IFSS) when grafting
polyethyleneoxide (PEO) polymers of various molecular weights to a carbon fiber surface …
polyethyleneoxide (PEO) polymers of various molecular weights to a carbon fiber surface …
Nanomechanical analysis of medical grade PEEK and carbon fiber-reinforced PEEK composites
SE Arevalo, LA Pruitt - Journal of the mechanical behavior of biomedical …, 2020 - Elsevier
Polyether ether ketone (PEEK) and PEEK composites are viable candidates for orthopedic
implants owing to their ability for modulus match of surrounding bone tissue. The structural …
implants owing to their ability for modulus match of surrounding bone tissue. The structural …
Influence of acidic environment on the hardness, surface roughness and wear ability of CAD/CAM resin-matrix ceramics
WS Alghamdi, N Labban, A Maawadh, HD Alsayed… - Materials, 2022 - mdpi.com
This study aimed to measure the effect of storage environment on the hardness, surface
roughness and wear ability of CAD/CAM resin-matrix ceramics. A total of 200 rectangular …
roughness and wear ability of CAD/CAM resin-matrix ceramics. A total of 200 rectangular …
Enhanced mechanical properties are possible with urethane dimethacrylate-based experimental restorative dental composite
AA Khan, AA AlKhureif, BA Mohamed… - Materials Research …, 2020 - iopscience.iop.org
This laboratory study aimed to replace the traditional bisphenol A-glycidyl methacrylate
(bisGMA) resin system with a urethane dimethacrylate (UDMA)-based resin system to …
(bisGMA) resin system with a urethane dimethacrylate (UDMA)-based resin system to …
Experimental study of the interfacial micromechanics of multifunctional unidirectional carbon fiber reinforced polymer composite laminates with copper mesh
MA Morales, TC Henry, BD Lawrence… - Journal of …, 2023 - journals.sagepub.com
The mechanical properties of a unidirectional carbon-fiber reinforced polymer (CFRP)
laminate with Cu mesh layers were investigated for use in aerospace applications as a …
laminate with Cu mesh layers were investigated for use in aerospace applications as a …
Enhancing the physical properties of acrylic resilient denture liner using graphene oxide nanosheets
AA Khan, MAT De Vera, BA Mohamed… - Journal of Vinyl and …, 2022 - Wiley Online Library
Resilient denture liners (RDLs) change their hardness in a short time. Hence, their
usefulness is limited to the short term only. Therefore, this laboratory study investigated the …
usefulness is limited to the short term only. Therefore, this laboratory study investigated the …
Influence of primers on the properties of the adhesive interface between resin composite luting cement and fiber-reinforced composite
AA Khan, AA Al-Kheraif, BA Mohamed… - Journal of the …, 2018 - Elsevier
Objectives The purpose of this study was to characterize the adhesive interface formed due
to the dissolving capability of 4 primer systems into pre-polymerized semi-interpenetrating …
to the dissolving capability of 4 primer systems into pre-polymerized semi-interpenetrating …
Antimicrobial capacity and physico-chemical characteristics of adhesive resin containing riboflavin after photodynamic therapy
M Hashem - Photodiagnosis and Photodynamic Therapy, 2021 - Elsevier
Purpose To assess the micro-tensile bond strength (μ-TBS), degree of conversion, and
antimicrobial capacity of modified dentin adhesive using riboflavin photoinitiators. Materials …
antimicrobial capacity of modified dentin adhesive using riboflavin photoinitiators. Materials …