Understanding the Effect of Water on CO2 Adsorption
Carbon capture from large sources and ambient air is one of the most promising strategies
to curb the deleterious effect of greenhouse gases. Among different technologies, CO2 …
to curb the deleterious effect of greenhouse gases. Among different technologies, CO2 …
Progress and current challenges for CO2 capture materials from ambient air
J Wang, R Fu, S Wen, P Ning, MH Helal… - … Composites and Hybrid …, 2022 - Springer
As a major component of greenhouse gases, excessive carbon dioxide (CO2) in the
atmosphere can affect human health and ecosystems. Therefore, the capture and …
atmosphere can affect human health and ecosystems. Therefore, the capture and …
Post-Combustion CO2 Capture Using Solid Sorbents: A Review
A Samanta, A Zhao, GKH Shimizu… - Industrial & …, 2012 - ACS Publications
Post-combustion CO2 capture from the flue gas is one of the key technology options to
reduce greenhouse gases, because this can be potentially retrofitted to the existing fleet of …
reduce greenhouse gases, because this can be potentially retrofitted to the existing fleet of …
CO2 capture by solid adsorbents and their applications: current status and new trends
In the last few years there has been a rapid growth in governmental funding and research
activities worldwide for CO2 capture, storage and utilization (CSU), due to increasing …
activities worldwide for CO2 capture, storage and utilization (CSU), due to increasing …
Capturing CO2 in flue gas from fossil fuel-fired power plants using dry regenerable alkali metal-based sorbent
CO 2 capture and storage (CCS) has received significant attention recently and is
recognized as an important option for reducing CO 2 emissions from fossil fuel combustion …
recognized as an important option for reducing CO 2 emissions from fossil fuel combustion …
CO2 absorption and regeneration of alkali metal-based solid sorbents
SC Lee, BY Choi, TJ Lee, CK Ryu, YS Ahn, JC Kim - Catalysis Today, 2006 - Elsevier
Potassium-based sorbents were prepared by impregnation with potassium carbonate on
supports such as activated carbon (AC), TiO2, Al2O3, MgO, SiO2 and various zeolites. The …
supports such as activated carbon (AC), TiO2, Al2O3, MgO, SiO2 and various zeolites. The …
CO2 capture using mesoporous alumina prepared by a sol–gel process
C Chen, WS Ahn - Chemical Engineering Journal, 2011 - Elsevier
Mesoporous alumina (MA) having high surface area (812m2/g) and large pore volume (0.83
cm3/g) with a narrow pore size distribution was prepared by a simple sol–gel process. The …
cm3/g) with a narrow pore size distribution was prepared by a simple sol–gel process. The …
Development of Regenerable MgO-Based Sorbent Promoted with K2CO3 for CO2 Capture at Low Temperatures
To improve their CO2 absorption capacity, alkali-based sorbents prepared by impregnation
and wet mixing method of potassium carbonate on supports such as activated carbon and …
and wet mixing method of potassium carbonate on supports such as activated carbon and …
Direct CO2 capture from ambient air using K2CO3/Al2O3 composite sorbent
JV Veselovskaya, VS Derevschikov, TY Kardash… - International Journal of …, 2013 - Elsevier
Abstract A composite sorbent K 2 CO 3/γ-Al 2 O 3 was synthesized and tested for direct
carbon dioxide capture from ambient air. Composition and structure of the composite were …
carbon dioxide capture from ambient air. Composition and structure of the composite were …
Dry Potassium-Based Sorbents for CO2 Capture
SC Lee, JC Kim - Catalysis Surveys from Asia, 2007 - Springer
Dry potassium-based sorbents were prepared by impregnation with potassium carbonate on
supports such as activated carbon (AC), TiO 2, Al 2 O 3, MgO, CaO, SiO 2 and various …
supports such as activated carbon (AC), TiO 2, Al 2 O 3, MgO, CaO, SiO 2 and various …