Modern advancements in lubricating grease technology
PM Lugt - Tribology international, 2016 - Elsevier
Grease is one of the major bearing components and the performance of a grease lubricated
bearing is strongly determined by the performance of the grease. This paper describes how …
bearing is strongly determined by the performance of the grease. This paper describes how …
On monitoring physical and chemical degradation and life estimation models for lubricating greases
A Rezasoltani, MM Khonsari - Lubricants, 2016 - mdpi.com
Degradation mechanisms for lubricating grease are categorized and described. An
extensive survey of the available empirical and analytical grease life estimation models …
extensive survey of the available empirical and analytical grease life estimation models …
Impact of oxidation on grease life in rolling bearings
PM Lugt, M Holgerson, F Reinholdsson - Tribology International, 2023 - Elsevier
In this paper the lubrication mechanism of lithium grease lubricated ball bearings in the
bleed phase is described. Oxidation plays an important role and therefore grease life “in air” …
bleed phase is described. Oxidation plays an important role and therefore grease life “in air” …
Rheological behaviors and tribological properties of nano-silica grease: A study compared with lithium grease and polyurea grease
H Liu, X Wang, T Yang, H Su, X Wang, S Zhang… - Tribology …, 2023 - Elsevier
Traditional greases gradually cannot meet the performance requirements of high efficiency
lubrication, and new nano-thickener greases are expected to be a promising lubricant. This …
lubrication, and new nano-thickener greases are expected to be a promising lubricant. This …
Probing the effect of thickener microstructure on rheological and tribological properties of grease
C Zhou, G Ren, X Fan, Y Lv - Journal of Industrial and Engineering …, 2022 - Elsevier
The thickener microstructure strongly determines the properties of lubricating grease. Here,
four types of grease were synthesized through different thickeners (lithium complex soap …
four types of grease were synthesized through different thickeners (lithium complex soap …
Effect of thickener particle geometry and concentration on the grease EHL film thickness at medium speeds
The aim of this paper was to understand the parameters influencing the grease film
thickness in a rolling elastohydrodynamically lubricated contact under fully flooded …
thickness in a rolling elastohydrodynamically lubricated contact under fully flooded …
Prediction of film thickness in starved EHL point contacts using two-phase flow CFD model
In grease lubricated rolling contacts, the oil bleeding from the grease bulk forms an
elastohydrodynamic lubricating (EHL) film. When the amount of bled oil at the contact inlet is …
elastohydrodynamic lubricating (EHL) film. When the amount of bled oil at the contact inlet is …
Effect of temperature on rheological behaviors and tribological properties of nano-silica greases prepared from base oils with different viscosities
H Liu, X Wang, Q Zhao, H Su, X Wang, S Zhang, W Lou - Tribology Letters, 2023 - Springer
Four kinds of nano-silica greases (NSGs) were prepared by poly-α-olefins (PAO4, PAO10,
PAO40, and PAO100) with different viscosities, respectively. The effect of temperature on the …
PAO40, and PAO100) with different viscosities, respectively. The effect of temperature on the …
[HTML][HTML] Ionic liquids enhance electrical conductivity of greases: an impedance spectroscopy study
Ionic liquids (ILs) have emerged as viable solutions for developing new-age lubricants, both
as neat lubricants and lubricant additives. Enabled by the presence of discrete ions, ILs …
as neat lubricants and lubricant additives. Enabled by the presence of discrete ions, ILs …
Modeling impact of grease mechanical ageing on bleed and permeability in rolling bearings
A Akchurin, D van den Ende, PM Lugt - Tribology International, 2022 - Elsevier
The evolution of the film thickness in a grease lubricated rolling bearings is given by a
continuous process of loss and replenishment of oil in the rolling track. It is believed that in a …
continuous process of loss and replenishment of oil in the rolling track. It is believed that in a …