A hybrid approach of cooling lubrication for sustainable and optimized machining of Ni-based industrial alloy
The utilization of cutting fluids in metalworking industries causes health issues and
environmental impacts. Owing to eco-friendly apprehensions and rising regulations over …
environmental impacts. Owing to eco-friendly apprehensions and rising regulations over …
[HTML][HTML] Comprehensive analysis of tool wear, surface roughness and chip morphology in sustainable turning of Inconel-601 alloy
The objective of this research was to explore the impact of various cooling conditions on
machinability, as potential alternatives to traditional cooling methods. To achieve this aim, a …
machinability, as potential alternatives to traditional cooling methods. To achieve this aim, a …
Evaluation of machining characteristics of SiO2 doped vegetable based nanofluids with Taguchi approach in turning of AISI 304 steel
In this study, nanofluids prepared by incorporating silicon dioxide (SiO 2) nanoparticles into
sunflower oil were used as cutting fluids for turning AISI 304 stainless steel. Dynamic …
sunflower oil were used as cutting fluids for turning AISI 304 stainless steel. Dynamic …
Surface integrity and tool wear mechanism of 7050-T7451 aluminum alloy under dry cutting
Z Ping, Y Xiujie, W Penghao, Y Xiao - Vacuum, 2021 - Elsevier
In this paper, we present an experimental study on the effects of cutting parameters on the
surface integrity and tool wear mechanism of AA7050-T7451 aluminum alloy under dry …
surface integrity and tool wear mechanism of AA7050-T7451 aluminum alloy under dry …
[HTML][HTML] A Review of High-Speed Turning of AISI 4340 Steel with Minimum Quantity Lubrication (MQL)
AISI 4340 is a medium-carbon low-alloy steel that has gained distinctive attention due to its
advanced properties including high strength, high toughness, and heat resistance. This has …
advanced properties including high strength, high toughness, and heat resistance. This has …
Effect of hBN and SDS added vegetable based cutting fluid application on the performance of turning Ti6Al4V alloys: A Comparative analysis with Taguchi and ANN …
In this study, during the turning process of Ti6Al4V alloy, which is difficult to machine,
nanofluid, whose base fluid is vegetable oil (sunflower oil), was applied to the cutting zone …
nanofluid, whose base fluid is vegetable oil (sunflower oil), was applied to the cutting zone …
Characterization and machine learning-based parameter estimation in MQL machining of a superalloy for developed green nano-metalworking fluids
M Vardhanapu, PK Chaganti, P Tarigopula - Journal of the Brazilian …, 2023 - Springer
Metalworking fluids (MWFs) are always been an integral part of a million-dollar global
manufacturing industry. With a paradigm shift towards ecological sustainability and fossil …
manufacturing industry. With a paradigm shift towards ecological sustainability and fossil …
Study of the effect of drill bits hardness, drilling machine operating parameters and rock mechanical parameters on noise level in hard rock drilling process
Rock drilling systems have extensive use in many industries including mining, construction,
and oil and water extraction. The process of drilling inevitably creates some noise at the drill …
and oil and water extraction. The process of drilling inevitably creates some noise at the drill …
Investigation on hard turning temperature under a novel pulsating MQL environment: An experimental and modelling approach
Generation of total heat in hard turning largely influenced the cutting tool wear, tool life and
finishing quality of work-surface. Thus, the measurement of this heat in terms of temperature …
finishing quality of work-surface. Thus, the measurement of this heat in terms of temperature …
Statistical study of surface texture and chip formation during turning of AISI 1020 steel: Emphasis on parameters Rsk, Rku, and Rk family and on the chip thickness …
Turning is recognized as one of the main manufacturing processes. Feed and cutting depth
are investigated by researchers who aim to continuously improve this process. Faced with …
are investigated by researchers who aim to continuously improve this process. Faced with …