A variety of cutting tool materials are used for the contact mode mechanical machining of
components under extreme conditions of stress, temperature and/or corrosion, including …

Based on Reddy's third order shear deformation shell theory and Galerkin method, this
paper introduces analytical solutions to study nonlinear buckling behaviors of imperfect …

Binary TiN monolayer coating cannot meet the demands of the industrial application. a route
for improving its performance is the addition of new element: silicon, boron or carbon …

In this study, the tribological behaviors of Mo 2 BC ceramics against four different
counterpart materials were studied. It was established that the tribological properties of Mo 2 …

Abstract Several amorphous Mo–B–C coatings with wide range of compositions were
subjected to thermal annealing to a final temperature of 1000° C in UHV conditions. The …

This research was devoted to studying the influence of the taper angle on the micro-
compression of micro-pillars fabricated from near-amorphous and nanocrystalline Mo-BC …

Single-phase polycrystalline Mo 2 BC ceramic bulks were synthesized successfully from
molybdenum, boron, and graphite powders using the spark plasma sintering method …

Mo 2 BC exhibits a unique combination of high stiffness and moderate ductility, enabling the
application as a protective and wear resistant coating. As the low temperature oxidation …

This thesis explores the XBC materials (X= Mo, Nb, Ta, W) in the form of thin coatings. It
details the motivation for the study of these materials, their deposition by magnetron …

As exigências para materiais e ferramentas estão em constante crescimento. As
necessidades recentes da engenharia, indústria de defesa, e do sector das empresas e …