Partial replacement of Si by Al improves the coatability (or galvanizing property) of Si-Mn
advanced high-strength steel (AHSS) sheets. In this paper, the effects of the partial …

In order to face the challenges of lightweight, safety, and emission reduction in the
automotive industry, transformation-induced plasticity aided bainitic ferrite (TBF) steel was …

The effect of plastic deformations on the hydrogen embrittlement (HE) of transformation-
induced plasticity (TRIP) steel was studied. In situ tensile tests showed that with increasing …

The growing demand for metallic materials resistant to both environmental corrosion and
hydrogen embrittlement under municipal wastewater conditions presents a significant …

We systematically investigated the effects of hydrogen and deformation temperature on the
micro-damage evolution and fracture behavior of the TRIP-aided bainitic ferrite steel using …

Aggregation of graphene oxide (GO) is significantly affected by dissolved organic matter
(DOM) in natural waters, while DOM's climate zone and light irradiation is seldom …

Stress and plastic strain distributions and those partitioning behaviors of ferrite and retained
austenite were investigated in the medium manganese (Mn) and the transformation-induced …

Hydrogen embrittlement (HE) continues to be a limiting factor in implementing high strength
steel alloys in applications such as fasteners. In this work, 9260 bar steel was heat treated to …

Bu çalışmada, 1, 5 mm kalınlığa sahip TRIP 800 çelik plakaları bakır esaslı S Cu 6100
(CuAl8) teliyle gaz metal ark lehimleme yöntemiyle birleştirilmiştir. Numuneler, bindirme …

Striving for developing alloys with high strength and sufficient uniform ductility has been an
imperative challenge in structural applications. The concept of a carbide-free bainite matrix …