An alloy system based on iron is described in which it has been possible to create a high
density of interfaces by heat treatment alone. The resulting structure consists of a mixture of …

There has long existed a controversy regarding the formation of the bainite phase in steels.
Nonetheless, following the clear identification of bainite in 1930, several characteristic …

The structure–property relationship in 0.06 C–5.5 Mn steel subjected to different annealing
temperatures and time was studied. Mn played a stronger effect on stabilizing austenite in …

In this work an annealed 0.6 wt% carbon steel was subjected to cyclic heat treatment
process that consisted of repeated short-duration (6min) holding at 810° C (above Ac3 …

Inconel 600 and other nickel-based superalloys are used extensively for a variety of
industrial applications involving high temperatures and aggressive environments. They are …

Boronizing has been considered as a promising strategy to enhance the surface hardness
and corrosion resistance of the new emerged alloys, like CoCrNi medium-entropy alloy …

In this work an annealed 0.16 wt% carbon steel was subjected to cyclic heat treatment
process that consisted of repeated short-duration (6min) holding at 910° C (above Ac3 …

In this work a homogenizing annealed 1.24 wt% carbon steel was subjected to cyclic heat
treatment process that consisted of repeated short-duration (6min) holding at 894° C (above …

Annealed AISI 1080 steel bars were subjected to cyclic heat treatment for different number of
cycles, viz. 1-cycle, 2-cycle and 3-cycle. Each cycle consisted of inserting the specimen in an …

In this work an annealed 0.6 wt.% carbon steel was subjected to cyclic heat treatment
process that consisted of repeated short-duration (6 min) holding at 810° C (above Ac 3 …