Abstract Machine learning (ML) continues to rise as an effective and affordable method of
tackling engineering problems. Unlike other disciplines, the integration of ML into structural …

A comprehensive literature review on the fatigue performance of Reinforced Concrete (RC)
beams strengthened using Fiber Reinforced Polymers (FRP) reinforcement is presented in …

The BSB (bimetallic steel bar) has a broad application prospect in RC (reinforced concrete)
structures servicing in corrosive environment. To determine seismic resistance of RC …

Mechanical properties of steel reinforcement bars, which have a critical effect in the overall
performance of reinforced concrete (RC) structures, should be reported and assessed …

The current work aims at proposing an EBSD-based indicator for fatigue damage of a Fe-3Si
steel. At the same time direct observation of dislocation structures is provided by electron …

In‐service bridge wires often fail prior to the design life subjected to alternating stresses and
environmental erosion. In this paper, a novel corrosion fatigue test device, integrating fatigue …

Microstructure and low-cycle fatigue behavior of spray-formed Al–Li alloy 2195 extruded
plate were investigated in this work. The spray-formed alloy after hot extrusion experiment …

The strain-controlled low cycle fatigue (LCF) tests were firstly carried out to investigate the
LCF behavior of the 2195 Al-Li alloy at warm temperatures (100 and 200° C). All initial and …

Pitting corrosion of tensile steel bars, usually causes the failure of RC beams under the
actions of chloride attack and fatigue. Based on the Fick's 2nd law and Paris law, a fatigue …

对Q235, Q345 钢的低周疲劳性能进行了研究. 采用轴向应变控制方法, 在岛津电液伺服疲劳
试验机上测定了2 种钢低周疲劳过程中的循环应力响应特征, 循环应力与应变的关系 …