Metallic biomaterials are engineered systems designed to provide internal support to
biological tissues and they are being used largely in joint replacements, dental implants …

Repairing and regenerating defects of large bones caused by disease or trauma is a
significant clinical challenge. Extensive research has been done on bone tissue …

Fabricating bimodal grain structure is an effective way to improve the mechanical properties
of Mg alloys. In present work, the various Mn contents (0, 0.5, 1.0, 1.5 wt%) are added in Mg …

In this study, an ultra-high yield strength (~ 417 MPa) and moderate ductility (~ 12.9%) was
obtained in Mg–8.2 Gd–3.8 Y–1.0 Zn–0.4 Zr (wt%) alloy through a method of decreased …

We describe here the ingenious concept of combining annealing of as-cast alloy with multi-
axial forging (MAF)(forging along x, y, and z-directions) that was applied to thermo …

RE-containing Mg alloys used as biodegradable medical implants exhibit good promising
application due to their good mechanical properties and degradation resistance. In this …

Magnesium (Mg) alloys are difficult to cold/warm-process due to their hexagonal close-
packed (HCP) lattice, which has restricted slip systems and makes plastic deformation at low …

CdO and MgO nanoparticles and CdO–MgO nanocomposite were synthesised and
investigated by XRD, FESEM (Field emission scanning electron microscopy) with EDS …

Abnormal grain growth (AGG) easily takes place in Mg alloys during high-temperature
solutions, resulting in deterioration of mechanical properties. Hence, the compression prior …

Presented here is the evolution of microstructure of Ta during multi-axial forging, with a
specific understanding of how grain boundary movement and their interaction occurs during …